Datasheet

PXC05 Series
1
PXC05 Series
Single and Dual Output 5W
DC-DC Converters
Key Market Segments & Applications
Telecom
Datacom
Factory Automation & Process Control
• Industry Standard 24 Pin Dip Package
• Five Sided Shielding
• Wide Range 4:1 Input
• 3.3, 5, 12, 15 Volt Outputs
• Pin & Surface Mount Models
PXC05 Features and Benefits
Features Benefits
• UL, C-UL, TUV, CE approvals • Easier system approvals
• Wide range input • Less parts to inventory
• Five sided shielding • Reduced radiated noise
Specifications
ITEMS PXC05
Max Output Power 5W
Voltage Accuracy +/-2%
Voltage Adjustment None
Minimum Load (1) 10%
Line Regulation +/-0.2%
Load Regulation (25% to100%) Single Output: +/-0.5%,Dual Output: +/-1%
Cross Regulation (25% to100%) Dual +/-5%
Ripple and Noise 50mVp-p (20MHz bandwidth)
Start up time 600ms
Temperature Coefficient <+/-0.02%/
°
C
Operating Temperature See derating curves
Maximum Case Temperature +100
°
C
Storage Temperature -55
°
C to +105
°
C
Thermal Shock MIL-STD-810D
Relative Humidity (non condensing) 5 to 95%
Transient Response 200µs recovery (25% stepload change)
Overvoltage Protection None
Overcurrent Protection Typically at 170%, self recovery
Input Surge Voltage (Max for10 0ms) 12V input: 36V, 24V input: 50V, 48V input: 100V
Reflected inputripple (peak to peak)(2) 20mA
Isolation Voltage 1600VDC min.
Isolation Resistance 10
9
Ω min.
Isolation Capacitance (max) 300pF
Typical Switching Frequency (Fixed) 300kHz
MTBF (BELLCORE TR-NWT-000332) 3,165,000 hours
Vibration 10 - 55Hz, 2G, 30 minutes each X, Y, Z axis
Conducted and Radiated Emissions EN55022 Level A
Immunity EN61000-4-2, -3, -4, -5, -6 Pref Criteria 2
Safety Agency Approval IEC60950-1, UL/CSA60950-1, EN60950-1, CE Mark
Size mm (L x W x H) 32 x 21 x 11
Weight (g) DIP 16 SMD 18
Warranty (yrs) 2
Notes: (1) To meet regulation & noise specifications. Operation at zero load will not damage the device
(2) 12 µH source impedance in series with + input (3) SMD package: Add suffix “/SMD” to model number.