Datasheet

Data Sheet

Jul. 20, 2010

PXB15-xxWDxx

15W, Dual Output

Short Circuit Protection

Continuous, hiccup and auto-recovery mode.

Duringa short circuit conditiontheconverter willshut down. The averagecurrent during

this condition will be verylow

and damage to this device should notoccur.

Thermal Consideration

The power module operates in a variety of thermal environments. However, s

ufficient cooling should be provided to

help ensure reliable operation of the unit. Heat is removed by conduction, convec

tion, and radiation to the surrounding

Environment. Proper cooling can be verified by measuring the point as shown in the figure below

. The temperature at

this location should not exceed 105 ºC. When Operating,adequate cooling must be provided to maintain the test point

temperature at or below 105 ºC. Although the maximum point Temperature of the power modules is 105

ºC,

maintaining a lower operating temperature will increasethe reliability of this device.

Heat Sink Consideration

The additionof a heat sink may be needed to decrease the temperature of the module; thus increasing its reliability.

TEMPERATUREMEASURE POINT

All dimensions in millimeters

7G-0047C-F