Datasheet

1861-800-526-2324 • www.us.tdk-lambda.com/lp/ Disclaimer: us.tdk-lambda.com/lp/legal.htm

iAD Series

Features

u Standard SIP Footprint

u 6.0-14VDC Input

u 0.8-5.5V Outputs

u Through Hole Mounting

u High operating efﬁ ciency (up to 94%)

u Constant switching frequency

u Starts with pre-biased output

16A Non-isolated Point of Load

Note: See website for detailed speciﬁ cations and test methods

Model iAD

Nominal Output Voltage VDC 0.8 - 5.5V

Input Voltage Range VDC 6 - 14V

Input Current (max) A 18A

Output Voltage Tolerance VDC N/A

Ripple & Noise (max) (pk-pk) mV 100

Line Regulation (max) mV 15

Load Regulation (max) mV 22

Overload Protection % Inception - 28A; Short circuit - auto recovery

Overvoltage Protection - N/A

Remote Sense - Yes

Remote On / Off - Positive or Negative Logic available, see Model Selector

Sequencing - Yes

Temperature (operating) °C -40 to 125

Temperature (storage) °C -55 to 125

Humidity (operating) - 20-95% RH Non condensing

Humidity (storage) - 10-95% RH Non condensing

Cooling - Convection or forced air

Isolation Voltage - none

Vibration (non-operating) - 5 to 50Hz@0.5g (4.9m/s

), & 50 to 500Hz@1.5g (14.7m/s

) per Bellcore TR-EOP-000063-5.4.4

Shock - 196.1m/s

Safety Agency Certiﬁ cations - UL60950 (US and Canada), VDE0805 (IEC60950), CB scheme (IEC60950)

Weight (max) g 12

Size (LxWxH) mm 50.8 x 7.9 x 14

Warranty - 3 Years

Speciﬁ cations

Key Market Segments & Applications

PAGE 1
iAD Series 16A Non-isolated Point of Load Features u Standard SIP Footprint u 6.0-14VDC Input u 0.8-5.
PAGE 2
iAD Series Model Selector Model iAD12016A008V-000-R iAD12016A008V-001-R Output Voltage (V) 0.8 - 5.5 0.8 - 5.5 Output Adjust (V) 0.8 - 5.5 0.8 - 5.5 Outline Drawing Mechanical Specifications: Dimensions are in mm [in]. Unless otherwise specificed tolerances are: x.x ±0.5 [0.02], x.xx ±0.25 [0.010] Output Curr. (A) 16 16 Max. Output Power (W) 80 80 Efﬁciency at Full Load (%) 94% @ 5V 94% @ 5V Pos. Logic On/Off X Neg.