Data Sheet

Worldwide Safety Agency Approvals; CE
Mark for LVD and EMC Regulation
Genesys™ GENH750W-1U
The Genesys™ family of programmable power supplies sets a new standard for flexible, reliable,
AC/DC power systems in OEM, Industrial and Laboratory applications.
Features include:
Front Panel Description
• High Power Density available:
750W in 1U half-rack size.
• Wide Range Input (85 - 265Vac Continuous)
• Active Power Factor Correction (0.99 typical)
• Output Voltage up to 600V, Current up to 100A
• Built-in RS-232/RS-485 Interface
• Front Panel Lockout
• Last-Setting Memory
• High Resolution 16 bit ADCs & DACs
• Reliable Encoders for Voltage and Current Adjustment
• Constant Voltage/Constant Current auto-crossover
• Advanced Parallel reports total current up to four
identical units
• Global Commands for Serial RS-232/RS-485 Interface
• Independent Remote ON/OFF
and Remote Enable/Disable
• External Analog Programming and Monitoring
• Reliable Modular and SMT Design
• 19" Rack Mounted ATE benchtop and OEM applications
• Side-by-side mounting of two units in a 19” rack
• Optional Interfaces
Isolated Analog Programming and Monitoring
Interface (0-5V/0-10V & 4-20mA)
IEEE 488.2 SCPI (GPIB) Multi-Drop
Compliant LAN
• LabView® and LabWindows® drivers
• Five Year Warranty
1. AC ON/OFF Switch
2. Air Intake allows zero stacking for maximum system flexibility and power density.
3. Reliable encoder controls Output Voltage and sets Address.
4. Volt Display shows Output Voltage and directly displays OVP, UVL and Address settings.
5. Reliable encoder controls Output Current, sets baudrate and Advanced Parallel mode.
6. Current Display shows Output Current and displays baudrate.
7. Function/Status LEDs:
• Alarm
• Fine Control
• Preview Settings
• Foldback Mode
• Remote Mode
• Output On
8. Pushbuttons allow flexible user configuration
• Coarse and Fine adjustment of Output Voltage/Current and Advanced Parallel Master or Slave
• Preview settings and set Voltage/Current with Output OFF, Front Panel Lockout
• Set OVP and UVL Limits
• Set Current Foldback
• Local/Remote Mode and select Address and Baudrate
• Output ON/OFF and Auto-Start/Safe-Start Mode
2 | GENESYS™ | GENH