Data Sheet

Genesys™ Power Parallel and Series Configurations
Parallel operation - Master/Slave:
Activecurrentsharingallowsuptofouridenticalunitstobeconnected
inanauto-parallelconfigurationforfourtimestheoutputpower.
InAdvancedParallelMaster/SlaveMode,totalcurrentis
programmedandreportedbytheMaster,Uptofoursuppliesact
as one.
Series operation
Uptotwounitsmaybeconnectedinseriestoincreasetheoutput
voltageortoprovidebipolaroutput.(Max600VtoChassisGround).
Remote Programming via RS-232 & RS-485 Interface
StandardSerialInterfaceallowsdaisy-chaincontrolofupto31
powersuppliesonthesamecommunicationbuswithbuilt-in
RS-232&RS-485Interface.
Programming Options (Factory installed)
Digital Programming via IEEE Interface P/N: IEEE
• IEEE488.2SCPICompliant
• ProgramVoltage •ProgramCurrent
• MeasureVoltage •MeasureCurrent
• OverVoltagesettingandshutdown •CurrentFoldbackshutdown
• ErrorandStatusMessages
• New! Multi-Drop
• AllowsIEEEMastertocontrolupto31slavesoverRS-485daisy-chain
• OnlytheMasterneedsbeequippedwithIEEEInterface
Isolated Analog Programming
FourChannelstoProgramandMonitorVoltageandCurrent.
Isolationallowsoperationwithfloatingreferencesinharshelectricalenvironments.
ChoosebetweenprogrammingwithVoltageorCurrent.
Connectionviaremovableterminalblock:PhoenixMC1,5/8-ST-3.81.
• VoltageProgramming,user-selectable0-5Vor0-10Vsignal. P/N: IS510
 PowersupplyVoltageandCurrentProgrammingAccuracy±1%
 PowersupplyVoltageandCurrentMonitoringAccuracy±1.5%
• CurrentProgrammingwith4-20mAsignal. P/N: IS420
 PowersupplyVoltageandCurrentProgrammingAccuracy±1%
 PowersupplyVoltageandCurrentMonitoringAccuracy±1.5%
LAN Interface Compliant to Class C P/N: LAN
• MeetsallLXI-CRequirements •VISA&SCPICompatible
• AddressViewableonFrontPanel •LANFaultIndicators
• FixedandDynamicAddressing •Auto-detectsLANCross-overCable
• CompatiblewithmoststandardNetworks •FastStartup
• TCP/UDPSocketProgramming
6 | GENESYS™ | 5kW