Data Sheet

Front Panel Description
1.ON/OFFSwitch
2.AirIntakeallowszerostackingformaximumsystemflexibilityandpowerdensity.
3.ReliableencodercontrolsOutputVoltage,Address,OVPandUVLsettings.
4.VoltDisplayshowsOutputVoltageanddirectlydisplaysOVP,UVLandAddresssettings.
5.ReliableencodercontrolsOutputCurrent,setsbaudrateandAdvancedParallelmode.
6.CurrentDisplayshowsOutputCurrentanddisplaysBaudrate.DisplaystotalcurrentinParallelMaster/
SlaveMode
7.Function/StatusLEDs:
•
Alarm
•
FineControl
•
PreviewSettings
•
FoldbackMode
•
RemoteMode
•
Output On
8.Pushbuttonsallowflexibleuserconfiguration
•CoarseandFineadjustmentofOutputVoltage/CurrentandAdvancedParallelMasterorSlave
•PreviewsettingsandsetVoltage/CurrentwithOutputOFF,FrontPanelLock
•ParallelMaster/Slave
•SetOVPandUVLLimits
•SetCurrentFoldbackProtection
•GotoLocalModeandselectAddressandBaudrate
•OutputON/OFFandAuto-Re-Start/Safe-StartMode
Rear Panel Description
1. Remote/LocalOutputVoltageSenseConnections.
2. DIPSwitchesselect0-5Vor0-10VProgrammingandotherfunctions.
3. DB25(Female)connectorallows(Non-isolated)AnalogProgramandMonitorandotherfunctions.
4. RS-485OUTtootherGenesys™PowerSupplies.
5. RS-232/RS-485INRemoteSerialProgramming.
6. OutputConnections:Ruggedbusbars(shown)forupto100VOutput;wireclampconnectorforOutputs>100V.
7. Exitairassuresreliableoperationwhenzerostacked.
8. Input:230VACSinglePhase(shown),208&400VACThreePhase,50/60Hz
 ACInputConnector:PHOENIXCONTACTPowerCombiconPC6/...Serieswithstrainrelief.
9. OptionalInterfacePositionforIEEE488.2SCPI(shown)orIsolatedAnalogInterfaceorLANInterface.
1
2
3
8
7
4
6
5
1
2 3
4
5
6
7
8
9
5kW | GENESYS™ | 3