Information


2.6.11 OPERATION COMPLETE COMMAND
Set the Operation Complete Bit in the Standard Event Status Register when all
RSHUDWLRQVKDYH¿QLVKHG
Syntax:
*OPC
Example:
*OPC
2.6.12 READ OPERATION COMPLETE COMMAND
3ODFHDLQWKH2XWSXW4XHXHZKHQDOORSHUDWLRQVKDYH¿QLVKHG
Syntax:
*OPC?
Example:
*OPC?
2.6.13 SAVE POWER SUPPLY SETTINGS COMMAND
Sends a command to the Power Supply causing it to save its operating settings:
Programmed voltage, Current, Over Voltage, Under Voltage, Remote/Local Mode,
Auto/Safe Restart, Current Fold Back, etc. can be stored in Memory.
To change one or more settings, enter the one or more commands with new settings
and then enter this command.
Syntax:
*SAV<SP><0>
Example:
*SAV 0
2.6.14 RECALL POWER SUPPLY SETTINGS COMMAND
Sends a command to the Power Supply causing it to recall its operating settings:
Recall Programmed voltage, Current, Over Voltage, Under Voltage, Remote/Local
Mode, Auto/Safe Restart and Current Fold Back. If the output of the supply was set
to an OFF condition by the Front Panel Button before the *RCL command was sent,
the supply will remain in the OFF state.
Syntax:
*RCL<SP><0>
Example:
*RCL 0