Information


2.4.2 CURRENT FOLD BACK PROTECTION
2.4.2.1 SET CURRENT FOLD BACK PROTECTION COMMAND
Turn on the current fold back protection of the Power Supply.
Syntax:
[SOURce]:CURRent:PROTection:STATe<SP><1>
Alternate Format:
:CURRENT:PROTECTION:STATE<SP>1
Example:
SOURCE:CURRENT:PROTECTION:STATE 1
2.4.2.2 CLEAR CURRENT FOLD BACK PROTECTION COMMAND
Turn off the current fold back protection of the Power Supply.
Syntax:
[SOURce]:CURRent:PROTection:STATe<SP><0>
Alternate Format:
:CURRENT:PROTECTION:STATE<SP>0
Example:
SOURCE:CURRENT:PROTECTION:STATE 0
2.4.2.3 READ CURRENT FOLD BACK STATE COMMAND
Read if the Fold back is enabled or disabled. The interface will return an ON if Fold Back
Protection is set or an OFF if not set.
Syntax:
[SOURce]:CURRent:PROTection:STATe?
Alternate Format:
:CURRENT:PROTECTION:STATE?
Example:
SOURCE:CURRENT:PROTECTION:STATE?
2.4.2.4 READ FOLD BACK TRIPPED STATE COMMAND
Read if the Power Supply Current Fold Back has tripped. The interface will return a 1 if Fold
Back Protection has tripped or a 0 if not tripped.
Syntax:
[SOURce]:CURRent:PROTection:TRIPped?
Alternate Format:
:CURRENT:PROTECTION:TRIPPED?
Example:
SOURCE:CURRENT:PROTECTION:TRIPPED?