Datasheet

1301-800-526-2324 • www.us.tdk-lambda.com/lp/ Disclaimer: us.tdk-lambda.com/lp/legal.htm
DRB15-100 Series
Features
 Compact Size
 High Effi ciency (Up to 91%)
 ErP Compliant Design
 Low No Load Power Draw
 Class 2 Models to UL1310
 Class 1 Div 2 for Hazardous Locations
15-100W, 5-48V Output DIN Rail Mount Power Supplies
(1) For operation below -10°C, start up load is derated linearly to 50% load down to -20°C
(2) NEC Class 2 in accordance with UL1310. Excludes DRB50-5-1 and DRB100-24-1 models
† Certifi cation to the IEC62368-1 standard in progress (2018)
* Safety certifi ed for AC input only
- 0.55 / 0.42 0.56 / 0.46 0.6 / 0.5 0.98 / 0.93
Key Market Segments & Applications
Model DRB15 DRB30 DRB50 DRB100
Input Voltage range V 85 - 264VAC, 120 - 373VDC* (Withstands 300VAC for 5 seconds)
Input Frequency Hz 47 - 63Hz
Inrush Current (typ) (Cold Start) A 35A 40A 50A 40A
Power Factor (110/230VAC)
Meets EN61000-3-2
Input Current (110/230VAC) A 0.27 / 0.17 0.55 / 0.33 0.9 / 0.55 1.2 / 0.6
Line & Load Regulation - See model selector
Ripple & Noise - See model selector
Overcurrent Protection - Hiccup with auto recovery
Overvoltage Protection - See model selector. Cycle AC input voltage to reset
Hold Up Time (230VAC input) ms > 20ms
Effi ciency - See model selector
No Load Power Draw W <0.3W <0.3W <0.3W <0.5W
LED Indicator - Green LED indicates DC is OK
Operating Temperature (1) °C -20 to +70°C. (DRB30-100, derate linearly to 50% load from 55 to 70°C)
Storage Temperature -40 to +85°C
Operating Humidity (non condensing) %RH 5 - 95%RH
Parallel Operation - Not available
Series Operation - Possible
Cooling - Convection
Withstand Voltage (For 1 minute) VAC Input to Output 3kVAC, Input to GND 1.5kVAC, Output to GND 500VAC
Isolation Resistance MΩ >100MΩ at 25°C, 70%RH & 500VDC
Vibration (Non operating) - 10-55Hz (sweep for 1 min); 19.6m/s
2
(2G) Constant; X,Y,Z each 1 hour
Shock - 294m/s (30G) 11ms half sine
UL508 Listed, UL/CSA/EN60950-1
†
, CE Mark, UL1310 Class 2 (2),
Safety Agency Certifi cations - Class 1 Div 2, Group A, B, C, D (ISA 12.12.01)
Conducted & Radiated EMI - EN55032-B Radiated & Conducted
Immunity - EN61000-4-2 (lvl 4) , -3 (lvl 3), -4 (lvl 4)
-5 (norm mode lvl 3, com mode lvl 4), -6 (lvl 3), -8 (lvl 4), -11 (class 3)
Line Dips - SEMI-F47 (200VAC input)
Weight (Typ) g 85 95 175 300
Size (WxHxD) in 0.71 x 2.95 x 3.54 0.83 x 2.95 x 3.54 1.18 x 2.95 x 3.54 1.77 x 2.95 x 3.94
Mounts on TS-35/7.5 or -35/15 rail mm 18 x 75 x 90 21 x 75 x 90 30 x 75 x 90 45 x 75 x 100
Case material - Flame Retardant Polycarbonate (UL94 V-0)
Warranty yrs Three years
Specifi cations