Datasheet

ManualsBrandsTDK-LAMBDA ManualsRack & DIN Rail Mount PSUsDIN Rail Power Supply 15Vdc 4000mA 60W

DPX60 Series

Specifications

ITEMS DPX60

Rated Input voltage range 24V nominal input 18-36VDC 48V nominal input 36-75VDC

Switching Frequency 300kHz, typ

Maximum Input Current See Table

Max Output Power (W) See Table

Voltage Accuracy Single/Dual ± 1.0% / Single (3.3V) ± 1.5%

Voltage Adjustment (Note 7) Single output ± 10%

Minimum Load N/A

Line Regulation (LL to HL at full load) Single at ± 0.5%

Ripple and Noise 20MHz bandwidth See table

Start up time

(Nominal Vin and constant resistive load)

Power up 100mS, typ (remote 20mS, typ)

Remote on/off (option) (Note 2) POSITIVE Logic: ON: Open or 3-12V, OFF Short or <1.2V

NEGATIVE Logic: ON: Short or <1.2V, OFF Open or 3-12V

Efficiency See Table

Over Current Protection, Factory Set Maximum, 150% of full load

Short Circuit Protection

(Note 3) Hiccup, auto recovery

Overvoltage Protection 3.3V output 3.7 VDC - 5.4VDC

5V output 5.6VDC - 7.0VDC

12V output 13.5VDC - 20.5VDC

15 output 16.8VDC - 20.5VDC

Operating Temperature -40˚C ~ 60˚C (without derating) 60˚C ~ 85˚C (with derating - see curve)

Storage Temperature -40˚C ~ 105˚C

Thermal Shock MIL-STD-810F

Relative Humidity (non condensing) 5% to 95% RH

Transient Response (25% step load change) 250µS

Isolation Voltage (Min) 1600Vdc

Isolation Resistance 10

Isolation Capacitance (Max) 4000 pF

MTBF BELLCORE TR-NWT-000332

(Note 1) 957,600 hrs

Vibration MIL-STD-810F

Conducted and Radiated Emissions EN55022, Class B

Immunity EN61000-4-2, EN61000-4-3, EN61000-4-4, EN61000-4-5, EN61000-4-6 Perf. Criteria A

Safety CE

Size (H x W x D) 57.6 x 24.5 x 125.0 mm

Weight 182g

Connector Screw Terminal

Cooling Convection

Front Panel LED Output DC good

Warranty yrs 2

DPX60 Series

Single Output 60W Din Rail Mount

DC-DC Converters

Key Market Segments & Applications

Communication Systems, Industry Control Systems

Factory Automation, Semiconductor Equipment

• Meet EN55022 Class B

• Input fuse protection

•

Input reverse polarity protection

• Input in-rush current protection

• Overload and short circuit protection

• Over voltage protection

• Reliable snap-on for DIN rail TS-35/7.5 or TS-35/15

•

I/O-isolation 1600 VDC

• Output DC-OK indicator

DPX60 Features and Benefits

Features Benefits

• CE Approvals • Easier System Approvals

• Less Parts to Inventory

Notes: See page 2

Summary of content (4 pages)

PAGE 1
• Meet EN55022 Class B • Input fuse protection • Input reverse polarity protection • Input in-rush current protection • Overload and short circuit protection • Over voltage protection • Reliable snap-on for DIN rail TS-35/7.
PAGE 2
Notes 1. 2. 3. 4. 5. 6. 7. BELLCORE TR-NWT-000332. Case I: 50% Stress, Temperature at 40˚C. MIL-HDBK-217F Notice2 @Ta=25˚C, Full load(Ground, Benign, controlled environment). The ON/OFF control pin voltage is referenced to -Vin. Positive logic standard. To order Negative logic ON/OFF control add the suffix-N (Ex:DPX60-48S05-N) Typical value at nominal input voltage and full load. Typical value at nominal input voltage and no load. Maximum value at nominal input voltage and full load.
PAGE 3
Efficiency / Load Curve DPX60-48S05 OUTPUT POWER (%) Derating Curve DPX60-48S05 AMBIENT TEMPERATURE (˚C) Efficiency / Input Curve DPX60-48S05 Pinout PIN 1 2 3 4 5 6 7 8 Options Single CTRL - Input - Input + Input NC - Output + Output NC Option Negative Logic Remote ON/OFF Suffix –N NC: No connection Screw terminals - wire range from 14 to 18 AWG DPX60 Series 3
PAGE 4
TDK-LAMBDA EMEA www.emea.tdk-lambda.com TDK-Lambda France SAS TDK-Lambda UK Ltd. Route de Grivery ZAC des Delaches CS 41077 91978 Courtaboeuf Cedex France Tel: +33 1 60 12 71 65 Fax: +33 1 60 12 71 66 france@fr.tdk-lambda.com www.fr.tdk-lambda.com Kingsley Avenue Ilfracombe Devon EX34 8ES United Kingdom Tel: +44 (0) 12 71 85 66 66 Fax: +44 (0) 12 71 86 48 94 powersolutions@uk.tdk-lambda.com www.uk.tdk-lambda.com Italy Sales Office Nemic Lambda Ltd.