Datasheet

DPX60 Series
2
Model Selector
Input Output Output Current Output (3) Input Current Eff. % Capacitor
Model Range Voltage Min Load Full Load Ripple & Noise No Load (4) Full Load (5) (3) Load Max (6)
DPX60-24S3P3 18 - 36 VDC 3.3 VDC 0mA 14000mA 75mVp-p 103mA 2376mA 85 36000µF
DPX60-24S05 18 - 36 VDC 5 VDC 0mA 12000mA 75mVp-p 155mA 3049mA 86 20400µF
DPX60-24S12 18 - 36 VDC 12 VDC 0mA 5000mA 100mVp-p 155mA 3049mA 86 3550µF
DPX60-24S15 18 - 36 VDC 15 VDC 0mA 4000mA 100mVp-p 155mA 3049mA 86 2300µF
DPX60-48S3P3 36 -75 VDC 3.3 VDC 0mA 14000mA 75mVp-p 83mA 1188mA 85 36000µF
DPX60-48S05 36 -75 VDC 5 VDC 0mA 12000mA 75mVp-p 104mA 1524mA 86 20400µF
DPX60-48S12 36 -75 VDC 12 VDC 0mA 5000mA 100mVp-p 104mA 1524mA 86 3550µF
DPX60-48S15 36 -75 VDC 15 VDC 0mA 4000mA 100mVp-p 104mA 1524mA 86 2300µF
Notes
1
. BELLCORE TR-NWT-000332. Case I: 50% Stress, Temperature at 40˚C. MIL-HDBK-217F Notice2 @Ta=25˚C, Full load(Ground, Benign, controlled environment).
2
. The ON/OFF control pin voltage is referenced to -Vin. Positive logic standard. To order Negative logic ON/OFF control add the suffix-N (Ex:DPX60-48S05-N)
3. Typical value at nominal input voltage and full load.
4. Typical value at nominal input voltage and no load.
5
. Maximum value at nominal input voltage and full load.
6
. Test by minimum Vin and constant resistive load.
7. Single outputs have a potentiometer to adjust the output voltage.
Outline Drawing DPX60 Series
All dimensions in inches (mm)
Tolerance: X. XX ± 0.04 (X.X±1.0)
X. XXX± 0.02 (X.XX±0.5)