Data Sheet

ManualsBrandsTDK-LAMBDA ManualsRack & DIN Rail Mount PSUsDIN Rail Power Supply 3.3Vdc 6000mA 30W

DPX30W Series

Model Selector

Input Output Output Current Output (3) Input Current Eff. % Capacitor

Model Range Voltage Min Load Full Load Ripple & Noise No Load (4) Full Load (5) (3) Load Max (6)

DPX30-24WS3P3 10 - 40 VDC 3.3 VDC 0mA 6000mA 60mVp-p 52mA 1031mA 84 19500µF

DPX30-24WS05 9.5 - 36 VDC 5 VDC 0mA 6000mA 75mVp-p 67mA 1563mA 84 10200µF

DPX30-24WS12 10 - 40 VDC 12 VDC 0mA 2500mA 100mVp-p 69mA 1563mA 84 3300µF

DPX30-24WS15 10 - 40 VDC 15 VDC 0mA 2000mA 100mVp-p 75mA 1543mA 85 1100µF

DPX30-24WD12 10 - 40 VDC ± 12 VDC 0mA ± 1250mA 100mVp-p 34mA 1623mA 81 ±1000µF

DPX30-24WD15 10 - 40 VDC ± 15 VDC 0mA ±1000mA 100mVp-p 40mA 1603mA 82 ±680µF

DPX30-48WS3P3 18 - 75 VDC 3.3 VDC 0mA 6000mA 60mVp-p 32mA 509mA 85 19500µF

DPX30-48WS05 18 - 75 VDC 5 VDC 0mA 6000mA 75mVp-p 32mA 762mA 86 10200µF

DPX30-48WS12 18 - 75 VDC 12 VDC 0mA 2500mA 100mVp-p 38mA 772mA 85 3300µF

DPX30-48WS15 18 - 75 VDC 15 VDC 0mA 2000mA 100mVp-p 48mA 762mA 86 1100µF

DPX30-48WD12 18 - 75 VDC ± 12 VDC 0mA ±1250mA 100mVp-p 28mA 791mA 83 ±1000µF

DPX30-48WD15 18 - 75 VDC ± 15 VDC 0mA ±1000mA 100mVp-p 28mA 781mA 84 ±680µF

Notes

1. BELLCORE TR-NWT-000332. Case I: 50% Stress, Temperature at 40°C. MIL-HDBK-217F Notice2 @Ta=25°C, Full load(Ground, Benign, controlled environment).

2. The ON/OFF control pin voltage is referenced to -Vin. To order Negative logic ON/OFF control add the suffix -N (Ex:DPX30-48WS05-N), for Positive logic add suffix -P (Ex:DPX30-48WS05-P)

3. Typical value at nominal input voltage and full load.

4. Typical value at nominal input voltage and no load.

5. Maximum value at nominal input voltage and full load.

6. Test by minimum Vin and constant resistive load.

7. Single outputs have a potentiometer to adjust the output voltage.

Outline Drawing DPX30W Series

All dimensions in inches (mm)

Tolerance: X. XX ± 0.04 (X.X±1.0)

X. XXX± 0.02 (X.XX±0.5)