Datasheet

DPX30W Series
2
Model Selector
Input Output Output Current Output (3) Input Current Eff. % Capacitor
Model Range Voltage Min Load Full Load Ripple & Noise No Load (4) Full Load (5) (3) Load Max (6)
D
PX30-24WS3P3 10 - 40 VDC 3.3 VDC 0mA 6000mA 60mVp-p 52mA 1031mA 84 19500µF
DPX30-24WS05 9.5 - 36 VDC 5 VDC 0mA 6000mA 75mVp-p 67mA 1563mA 84 10200µF
DPX30-24WS12 10 - 40 VDC 12 VDC 0mA 2500mA 100mVp-p 69mA 1563mA 84 3300µF
DPX30-24WS15 10 - 40 VDC 15 VDC 0mA 2000mA 100mVp-p 75mA 1543mA 85 1100µF
DPX30-24WD12 10 - 40 VDC ± 12 VDC 0mA ± 1250mA 100mVp-p 34mA 1623mA 81 ±1000µF
DPX30-24WD15 10 - 40 VDC ± 15 VDC 0mA ±1000mA 100mVp-p 40mA 1603mA 82 ±680µF
DPX30-48WS3P3 18 - 75 VDC 3.3 VDC 0mA 6000mA 60mVp-p 32mA 509mA 85 19500µF
DPX30-48WS05 18 - 75 VDC 5 VDC 0mA 6000mA 75mVp-p 32mA 762mA 86 10200µF
DPX30-48WS12 18 - 75 VDC 12 VDC 0mA 2500mA 100mVp-p 38mA 772mA 85 3300µF
DPX30-48WS15 18 - 75 VDC 15 VDC 0mA 2000mA 100mVp-p 48mA 762mA 86 1100µF
DPX30-48WD12 18 - 75 VDC ± 12 VDC 0mA ±1250mA 100mVp-p 28mA 791mA 83 ±1000µF
DPX30-48WD15 18 - 75 VDC ± 15 VDC 0mA ±1000mA 100mVp-p 28mA 781mA 84 ±680µF
N
otes
1
. BELLCORE TR-NWT-000332. Case I: 50% Stress, Temperature at 40°C. MIL-HDBK-217F Notice2 @Ta=25°C, Full load(Ground, Benign, controlled environment).
2
. The ON/OFF control pin voltage is referenced to -Vin. Positive logic standard. To order Negative logic ON/OFF control add the suffix-N (Ex:DPX30-48WS05-N)
3. Typical value at nominal input voltage and full load.
4
. Typical value at nominal input voltage and no load.
5
. Maximum value at nominal input voltage and full load.
6. Test by minimum Vin and constant resistive load.
7. Single outputs have a potentiometer to adjust the output voltage.
Outline Drawing DPX30W Series
All dimensions in inches (mm)
Tolerance: X. XX ± 0.04 (X.X±1.0)
X. XXX± 0.02 (X.XX±0.5)