Datasheet

ManualsBrandsTDK-LAMBDA ManualsRack & DIN Rail Mount PSUsDIN Rail Power Supply ± 5Vdc ± 1500mA 15W

DPX15W Series

Model Selector

Input Output Output Current Output Current Output (3) Input Current Input Current Eff % Capacitor

Model Range Voltage Min Load Full Load Ripple & Noise No Load (4) Full Load (5) (3) Load Max (6)

DPX15-24WS3P3 9.5 - 36 VDC 3.3 VDC 0mA 4500mA 50mVp-p 52mA 773mA 84 147000µF

DPX15-24WS05 9.5 - 36 VDC 5 VDC 0mA 3000mA 50mVp-p 67mA 772mA 85 7200µF

DPX15-24WS5P1 9.5 - 36 VDC 5.1 VDC 0mA 3000mA 50mVp-p 67mA 787mA 85 7200µF

DPX15-24WS12 9.5 - 36 VDC 12 VDC 0mA 1250mA 75mVp-p 26mA 772mA 85 1250µF

DPX15-24WS15 9.5 - 36 VDC 15 VDC 0mA 1000mA 75mVp-p 26mA 772mA 85 800µF

DPX15-24WD05 9.5 - 36 VDC ±5 VDC 0mA ±1500mA 75mVp-p 57mA 772mA 85 ±3600µF

PX15-24WD12 9.5 - 36 VDC ±12 VDC 0mA ±625mA 75mVp-p 35mA 762mA 86 ±625µF

DPX15-24WD15 9.5 - 36 VDC ±15 VDC 0mA ±500mA 75mVp-p 35mA 762mA 86 ±400µF

DPX15-48WS3P3 18 - 75 VDC 3.3 VDC 0mA 4500mA 50mVp-p 37mA 387mA 84 14700µF

DPX15-48WS05 18 - 75 VDC 5 VDC 0mA 3000mA 50mVp-p 38mA 381mA 86 7200µF

DPX15-48WS5P1 18 - 75 VDC 5.1 VDC 0mA 3000mA 50mVp-p 38mA 389mA 86 7200µF

DPX15-48WS12 18 - 75 VDC 12 VDC 0mA 1250mA 75mVp-p 18mA 386mA 85 1250µF

DPX15-48WS15 18 - 75 VDC 15 VDC 0mA 1000mA 75mVp-p 18mA 386mA 85 800µF

DPX15-48WD05 18 - 75 VDC ± 5 VDC 0mA ± 1500mA 75mVp-p 37mA 381mA 86 ±3600µF

DPX15-48WD12 18 - 75 VDC ± 12VDC 0mA ± 625mA 75mVp-p 20mA 381mA 86 ±625µF

DPX15-48WD15 18 - 75 VDC ± 15 VDC 0mA ± 500mA 75mVp-p 20mA 381mA 86 ±400µF

Notes see above

1. BELLCORE TR-NWT-000332. Case I: 50% Stress, Temperature at 40°C. MIL-HDBK-217F Notice2 @Ta=25°C, Full load(Ground, Benign, controlled environment).

2. The ON/OFF control pin voltage is referenced to -Vin. Positive logic standard To orderNegative logic ON/OFF control add the suffix-N (Ex:DPX15-48WS05-N)

3. Typical value at nominal input voltage and full load.

4. Typical value at nominal input voltage and no load.

5. Maximum value at nominal input voltage and full load.

6. Test by minimum Vin and constant resistive load.

Outline Drawing DPX15W Series

All dimensions in inches (mm)

Tolerance: X. XX ± 0.04 (X.X±1.0)

X. XXX± 0.02 (X.XX±0.5)