Certificate

ManualsBrandsTDK-LAMBDA ManualsRack & DIN Rail Mount PSUsDIN Rail Power Supply 24Vdc 0.63A 15W, 1-Phase, PFC

3.433 10.03 30.662 -

12.053 1.61 17.113 -

ZPT40-5121 2N[r*]

100-240ac 47-63 0 5 3 42.6 3 60950 20B 0 1

12 2 - -

-12 0.3 - -

ZPT40-5125N[r*]

100-240ac 47-63 0 5 3 40.5 3 60950 20B 0 1

12 2 - -

-5 0.3 - -

ZPT40-5151 5N

100-240ac 47-63 3 5.042 4.6 17.572 3 60950 20B 0 1

17.748 3.52 49.393 -

15.235 1.43 15.216 -

ZPT40-5241 2

100-240ac 47-63 0 5.029 4.85 17.872 3 60950 20B 0 1

27.76 2.45 52.357 -

12.008 1.51 9.351 -

ZPT40-5241 2N[r*]

100-240ac 47-63 0 5 3 42.6 3 60950 20B 0 1

24 1 - -

-12 0.3 - -

ZPT40-5245N[r*]

100-240ac 47-63 0 5 3 40.5 3 60950 20B 0 1

24 1 - -

-5 0.3 - -

[*r] - Output values are rated.

($) - may be followed by characters as described in Model Differences, see Model Differences for details

(+b) - Unit Configuration Code: NVx-abcde-f-g-h-ijk, where: x = 1 for 175; a = Number of Outputs : 1, 2, 3 or 4; b = Channel 1 Output

Voltage?: 5, T, F, E or G; c = Channel 2 Output Voltage?: 1 , 2, 3, 5, 5L, 7, F or 0; d = Channel 3 Output Voltage?: 3L, 5L, 7, TL, FL, T, F, G

followed by Y for negative output or 0; e = Channel 4 Output Voltage?: 3H, 5H, 7, T, F, TH, FH, 0H (fan only channel 4 output) followed by V for

variable output followed by P for positive output or 0; f = Global Option : N for 5V version, N1 for 12V version, N2 for 13.5V version, N3 for 5V

version with ATX compatibility, N4 for 12V version with ATX compatibility, N5 for 13.5V version with ATX, N6* for 12-13.5V version, N7* for 12-

13.5V version with ATX or nothing for no Global Option present; g = U for U chassis, C for U chassis and cover, F for U chassis and cover with

fan, I for U chassis and cover with fan and IEC inlet or nothing for Open Frame; h = Blank is the standard upright output connector, R is for the

right angle output connector, H is for high altitude, HR is for high altitude with right angle output connector, M is for IEC60601-1, MR is for

IEC60601-1 spacings with right angle connector; ijk = Three numbers from 0 to 9 which denotes various output voltages and currents within the

specified ranges of each output for a particular unit or blank for standard output settings. (*Can only be set at the factory.)

(+c) - Model numbering nomenclature: Sirius F250abcde or CSF250abcde series, where abcde defines the model configuration: a= EI for End

fans with switched IEC input connector or EIF for End fans with double pole fused IEC input connector or EIR for Reverse air end fans, with

switched IEC input connector or EIFR for Reverse air end fans, with double pole fused IEC input connector or EM for End fans with 3 pin header

(Molex type) input connector or TM for Top fan with 3 pin header (Molex type) input connector or SIF for single end fan with double pole fused

IEC input connector or SM for single end fan with 3 pin (Molex type) input connector or SI for single end fan with IEC input connector or NM for

External forced air cooling (open ended cover fitted) with 3 pin header (Molex type) input connector or LM for Open frame and external forced air

cooling with 3 pin header (Molex type) input connector. May be followed by:- b=ML for Medium Leakage or LL for Low Leakage or RL for Reduced

Leakage or TL for Tiny Leakage or Nothing for standard Class B filter. c=?/? for applicable base board dual output voltage. d=may be followed by

up to two of the following: @ followed by A, B, C, L or N or @/@ followed by D, E, F, G, H, J or M where @ = applicable single output module

voltage @/@ = applicable dual output module voltage letter = output module fitted. e=may be followed by: B/S where B/S = blanking plate.

(e) - 4.99 Volt output

(f) - 15.87 Volt output

(f1) - Output ratings shown are the maximum rating for the entire series; ratings for individual models will vary

(f2) - Suffixes represent input/output options, including number of outputs provided and output ratings

(f3) - Output VA value is the total of all outputs

(f6) - Complementary Recognized as Component Power Supplies, Medical and Dental (QQHM2, -8) and Component Power Supplies, Specialty

(QQIJ2, -8)

(f7) - Also evaluated to UL 3101-1/UL 2601-1

(g) - 24 Volt output

+a - Units may be marked with Product Code: X5x or NVM1x where x may be any number of letters and/or numbers 0 - 9. Unit Configuration

Code (Description): may be prefixed by NS# followed by/or - (where # may be any number of characters indicating non-safety rela

ted model

Page 2

of 2

QQGQ2.E135494 - Power Supplies, Information Technology Equipment Including ...

20.04.201

htt

://database.ul.com/c

in/XYV/tem

late/LISEXT/1FRAME/show

e.html?na

...