Instructions

INSTRUCTION MANUAL
CCG
TDKLambda
<Page>
22/23
82. Recommended Soldering Condition
Recommended soldering conditions are as follows.
(1) Soldering Dip
Dip condition ： 260ºC within 10 seconds
Preheat condition : 110ºC for 30 – 40 seconds
(2) Soldering Iron
350ºC within 3 seconds
Note) Soldering time changes according to heat capacity of soldering iron, pattern on printed circuit board
etc. Please confirm actual performance.
83. Recommended Cleaning Condition
Recommended cleaning condition after soldering is as follows.
(1) Cleaning Solvent
IPA (isopropyl alcohol)
(2) Cleaning Procedure
Use brush and dry the solvent completely before use.