Datasheet

No. MATERIAL NAME
MATERIAL REMARKS
PRODUCT NAME or MODEL,TITLE
DC-DC CONVERTER UNIT CC6-xxxxxR-E Series
PAGENAME OF DRAWING DRAWING No.
PRODUCT SPECIFICATIONS TRSA-0287-3 /
TDK CORPORATION
QU
17
10
Product Open Short to -Vout terminal
CC6-xx03SR-E 3.3V 3.6V
CC6-xx05SR-E 5.0V 6.0V
CC6-xx12SR-E 12.0V 15.0V
CC6-xx12DR-E ±12.0V ±15.0V
[8] Functions
8-2. Output Voltage Adjustment
It is possible to adjust the output voltage as shown below by connecting the TRM terminal to the -Vout terminal.
When you don't want to adjust the output voltage, open the TRM terminal.
8-1. On/Off function(RC)
The converter can be turned on or off by using RC terminal(2 pin).
On function / Start operation: RC terminal is Low ( 0 ~ 0.4 with respect to -Vin)
Off function / Stop operation: RC terminal is Open or High
Note:
RC Current : external circuitry requires to sink maximum of 1mA during on function.
RC Voltage: Maximum voltage is +Vin
Output voltage can be adjusted up or down by connecting a resistor between Output TRM pin
and the output (+Vin or -Vin) as shown below.
+Vin
-Vin
+Vout
-Vout
RC
RC
signal