Datasheet

DC - DC CONVERTER UNIT
DC - DC CONVERTER UNITDC - DC CONVERTER UNIT
DC - DC CONVERTER UNIT
Technical data DC/DC converter unit CCxx-xxxxSxx-E
SAFETY INSTRUCTIONS
Safety attention manual Notes that use DC to DC converter
Please be sure to read these instructions for safe design when using the product.
Improper use may pose the danger of smoke or fire.
Caution Notes
Caution NotesCaution Notes
Caution Notes
Storage
● Store the converter unit in the manner specified in the purchase specifications or catalog.
● Do not store the converter unit in a corrosive gas or corrosive dust environment.
● Do not store the converter unit in a strong electrical or magnetic field. It will cause damage.
Environment & Conditions of Use
● Do not operate the converter unit in a corrosive gas or corrosive dust environment.
● Operate the converter unit in the environment and under the conditions specified in the purchase specifications or
catalog.
● Operate the input and output voltage, output current, etc. within the rated electrical specifications.
● This converter has no built-in over input voltage protection.
● A continuous over current condition may damage the converter.
● This DC to DC converter is not internally fused. To ensure safe operation and to receive each Safety Standards
approvals, please install an external fuse (fast-blow type).
● Be sure to insulate the metal case bottom from surrounding components and trace pattern.
● Do not operate the converter unit in a strong electrical or magnetic field.
● If there is the possibility of surge voltages occurring, take surge voltage prevention countermeasures.
● Please do not touch the inside of the product because it could cause electric shock
● Please notes that do not enter the foreign object. because it could cause the breakdown, the ignition, and the
electric shock.
● Do not change or modify the product , TDK will not be responsible for any damage due to modification.
● Do not remove or disassemble the case.
● The converter unit is not designed to be resistant to radiation. Do not use it in nuclear power controls medical
equipment, etc.
● The converter unit is not designed to be resistant to radiation. Do not use it in nuclear power controls medical
equipment, etc.
● Give due design consideration for safeguarding against personal injury, fire and other accidents.
● Give due design consideration for safeguarding against personal injury, fire and other accidents.
● The converter unit must be wired according to the measurement circuits given in the purchase specifications or
catalog. Consult TDK concerning any other connection schemes to avoid possible damage.
● Do not inject reverse voltage or over voltage to the terminals from the outside because it could cause failure.
Notes
● The warranty period for this converter is five years, except for the following cases:
＊Malfunction or damage due to modification or incorrect operation.
＊Malfunction or damage due to transportation after the product has been delivered.
＊Malfunction or damage due to fire, earthquake, wind, flood, other natural disasters or abnormal voltages.
＊Malfunction or damage caused by other equipment connected to the product.
●Note that an extended storage (over 1 year) in a location of high temperature, humidity, or sudden temperature
fluctuations may cause the solder connections to deteriorate.
● Do not apply any strong shock to the converter unit, such as dropping the product, etc. because it may cause
damage to the terminal pins or to other parts.
PRINTED IN JAPAN
４
４４
４ＣＡ－
ＣＡ－ＣＡ－
ＣＡ－１２２１４５８
１２２１４５８１２２１４５８
１２２１４５８
16/16