Datasheet

No. MATERIAL NAME
MATERIAL REMARKS
PRODUCT NAME or MODEL,TITLE
DC-DC CONVERTER UNIT CC3-xxxxxR-E Series
PAGENAME OF DRAWING DRAWING No.
PRODUCT SPECIFICATIONS TRSA-0285-3 /
TDK CORPORATION
QU
17
Product
CC3-xx03SR-E
CC3-xx05SR-E
CC3-xx12SR-E
CC3-xx12DR-E
Output Capacitor
range
220uF max.
220uF max.
100uF max.
47uF max.
13
[9] Packaging and Marking
Components are packaged to prevent damage from moisture and handling. The following items shall be marked :
1. Manufacturer's part number CC3-xxxxxR-E (Ex: CC3-0505SR-E)
2. Name of manufacturer TDK
[10] Environment
[11] Test Condition
Unless specified otherwise, the following specification applies:
Ambient Temperature: 20±15°C
Relative Humidity: 65±20%
[12] Other precaution
Under normal conditions, this product will operate even without connecting an external capacitor.
However, if there is a desire to further decrease noise or if the pattern layout is too long,
connect a capacitor within the range shown in the table below.
We recommend that the substrate not be washed after soldering.
However, depending on the conditions, it is possible in some situations,
therefore consult us concerning this.
This product is certified to the following safety standards :
UL60950-1, CUL(CSA 60950-1), EN60950-1 (NEMKO)
This product complies with Restriction of Hazardous Substances (RoHS) directive that refers to the regulation of
harmful substances by the European Union (EU) effective July 1, 2006. The directive bans the use of six specific
harmful substances in electric and electronic devices and products handled within the EU. The six substances
are lead, mercury, cadmium, hexavalent chromium, PBB (polybrominated biphenyls), and PBDE (polybrominated
diphenylethers).