Information

ManualsBrandsTDK-LAMBDA ManualsPSU ComponentsDC/DC converter (print) 48 Vdc 5 Vdc 1.2 A 6 W No. of outputs: 1 x

・All speciﬁcations are subject to change without notice.

CC 3 - 05 05 S F -E

■ Features

●Mounting area halved compared to existing products

●Nonuse of tantalum capacitor or aluminum electro-

lytic capacitor

●Remote On/Oﬀ function incorporated in all series of

products

●5-side metal-shielded low noise design

●Lightweight design with no resin ﬁlled up

itrevPISdnagnitnuomDMS,noitresniPIDstroppuS● -

cal insertion (3W products)

●Approved by UL60950-1, CSA C22.2 No.60950-1

(C-UL), and EN60950-1 (NEMKO)

CC-E

■ Product Line up

Insulation type DC-DC converter

■ Applications

■ Model-naming method

Shape

Symbol for number of outputs

S: Single output, D: Dual outputs

Nominal output voltage

03: 3.3V, 05: 5V, 12: 12V

Nominal input voltage

05: 5V, 12: 12V, 24: 24V, 48: 48V

Maximum output power

1R5: 1.5W, 3: 3W, 6:6W

10: 10W, 15: 15W, 25: 25W

Representing series name by

combination with "-E"at the end

Output

power

Input

voltage

Model name

(output voltage: 3.3V)

Model name

(output voltage: 5V)

Model name

(output voltage: 12V/15V)

Model name

Output current

DIP type SMD type SIP type

Output current

DIP type SMD type SIP type

Output current

DIP type SMD type SIP type

Output current

DIP type SMD type SIP type

1.5W

5V 0.4A

CC1R5-0503SF-E CC1R5-0503SR-E -

0.3A

CC1R5-0505SF-E CC1R5-0505SR-E -

0.125A (0.1A)

CC1R5-0512SF-E CC1R5-0512SR-E -

0.06A (0.05A)

CC1R5-0512DF-E CC1R5-0512DR-E -

12V 0.4A

CC1R5-1203SF-E CC1R5-1203SR-E -

0.3A

CC1R5-1205SF-E CC1R5-1205SR-E -

0.125A (0.1A)

CC1R5-1212SF-E CC1R5-1212SR-E -

0.06A (0.05A)

CC1R5-1212DF-E CC1R5-1212DR-E -

24V 0.4A

CC1R5-2403SF-E CC1R5-2403SR-E -

0.3A

CC1R5-2405SF-E CC1R5-2405SR-E -

0.125A (0.1A)

CC1R5-2412SF-E CC1R5-2412SR-E -

0.06A (0.05A)

CC1R5-2412DF-E CC1R5-2412DR-E -

48V 0.4A

CC1R5-4803SF-E CC1R5-4803SR-E -

0.3A

CC1R5-4805SF-E CC1R5-4805SR-E -

0.125A (0.1A)

CC1R5-4812SF-E CC1R5-4812SR-E -

0.06A (0.05A)

CC1R5-4812DF-E CC1R5-4812DR-E -

5V 0.8A

CC3-0503SF-E CC3-0503SR-E CC3-0503SS-E

0.6A

CC3-0505SF-E CC3-0505SR-E CC3-0505SS-E 0.25A (0.2A) CC3-0512SF-E CC3-0512SR-E CC3-0512SS-E

0.125A (0.1A)

CC3-0512DF-E CC3-0512DR-E CC3-0512DS-E

12V 0.8A

CC3-1203SF-E CC3-1203SR-E CC3-1203SS-E

0.6A

CC3-1205SF-E CC3-1205SR-E CC3-1205SS-E 0.25A (0.2A) CC3-1212SF-E CC3-1212SR-E CC3-1212SS-E

0.125A (0.1A)

CC3-1212DF-E CC3-1212DR-E CC3-1212DS-E

24V 0.8A

CC3-2403SF-E CC3-2403SR-E

0.6A

CC3-2405SF-E CC3-2405SR-E CC3-2405SS-E 0.25A (0.2A) CC3-2412SF-E CC3-2412SR-E CC3-2412SS-E

0.125A (0.1A)

CC3-2412DF-E CC3-2412DR-E CC3-2412DS-E

48V 0.8A

CC3-4803SF-E CC3-4803SR-E CC3-4803SS-E

0.6A

CC3-4805SF-E CC3-4805SR-E CC3-4805SS-E 0.25A (0.2A) CC3-4812SF-E CC3-4812SR-E

0.125A (0.1A)

CC3-4812DF-E CC3-4812DR-E CC3-4812DS-E

5V 1.2A

CC6-0503SF-E CC6-0503SR-E -

CC6-0505SF-E CC6-0505SR-E - 0.5A (0.4A) CC6-0512SF-E CC6-0512SR-E -

0.25A (0.2A) CC6-0512DF-E CC6-0512DR-E -

12V 1.2A

CC6-1203SF-E CC6-1203SR-E -

1.2A

CC6-1205SF-E CC6-1205SR-E - 0.5A (0.4A) CC6-1212SF-E CC6-1212SR-E - 0.25A (0.2A) CC6-1212DF-E CC6-1212DR-E -

24V 1.2A

CC6-2403SF-E CC6-2403SR-E -

1.2A

CC6-2405SF-E CC6-2405SR-E - 0.5A (0.4A) CC6-2412SF-E CC6-2412SR-E - 0.25A (0.2A) CC6-2412DF-E CC6-2412DR-E -

48V 1.2A

CC6-4803SF-E CC6-4803SR-E -

1.2A

CC6-4805SF-E CC6-4805SR-E - 0.5A (0.4A) CC6-4812SF-E CC6-4812SR-E - 0.25A (0.2A) CC6-4812DF-E CC6-4812DR-E -

10W

5V 2.5A

CC10-0503SF-E CC10-0503SR-E -

CC10-0505SF-E CC10-0505SR-E - 0.8A (0.64A) CC10-0512SF-E CC10-0512SR-E - 0.4A (0.32A) CC10-0512DF-E CC10-0512DR-E -

12V 2.5A

CC10-1203SF-E CC10-1203SR-E -

CC10-1205SF-E CC10-1205SR-E -

1A (0.8A)

CC10-1212SF-E CC10-1212SR-E -

0.45A (0.36A)

CC10-1212DF-E CC10-1212DR-E -

24V 2.5A

CC10-2403SF-E CC10-2403SR-E -

CC10-2405SF-E CC10-2405SR-E -

1A (0.8A)

CC10-2412SF-E CC10-2412SR-E -

0.45A (0.36A)

CC10-2412DF-E CC10-2412DR-E -

48V 2.5A

CC10-4803SF-E CC10-4803SR-E -

CC10-4805SF-E CC10-4805SR-E -

1A (0.8A)

CC10-4812SF-E CC10-4812SR-E -

0.45A (0.36A)

CC10-4812DF-E CC10-4812DR-E -

15W 24V 4.5A

CC15-2403SF-E CC15-2403SR-E -

CC15-2405SF-E CC15-2405SR-E - - - - - - - - -

25W 24V 7.5A

CC25-2403SF-E CC25-2403SR-E -

CC25-2405SF-E CC25-2405SR-E - - - - - - - - -

F: Horizontally-mounted DIP type

R: Horizontally-mounted SMD type

FS Vertically-mounted SIP type

This means that, in conformity with EU Directive

2002/95/EC, lead, cadmium, mercury, hexavalent

chromium, and speciﬁc bromine-based ﬂame retar -

dants, PBB and PBDE, have not been used, except for

exempted applications.

■

Conformity to RoHS Directive

High accuracy of ± 3% in output voltage (10W of

lower single output)

(output voltage: ±12V/±15V)

Low Voltage Directive

UL60950-1/

CSA C22.2 No.60950-1

EN60950-1

warranty

wen150629

Summary of content (25 pages)

PAGE 1
CC-E Insulation type DC-DC converter Low Voltage Directive ■ Features R: Horizontally-mounted SMD type FS Vertically-mounted SIP type Symbol for number of outputs S: Single output, D: Dual outputs Nominal output voltage 03: 3.3V, 05: 5V, 12: 12V Nominal input voltage 05: 5V, 12: 12V, 24: 24V, 48: 48V ●5-side metal-shielded low noise design ●Lightweight design with no resin ﬁlled up ●Supports DIP insertion,SMD mounting and SIP vertical insertion (3W products) ●Approved by UL60950-1, CSA C22.2 No.
PAGE 2
CC1R5-E CC1R5-E Specifications MODEL CC1R5-0503Sx-E CC1R5-0505Sx-E CC1R5-0512Sx-E CC1R5-0512Dx-E ITEMS/UNITS Nominal Voltage V DC5.0 Voltage Range V DC4.5-9.0 Input Efficiency (typ) (*1) ％ 71 77 80 79 Current (typ) (*1) A 0.372 0.390 0.375 0.380 Nominal Voltage VDC 3.3 5 12 15 12 15 Maximum Current A 0.400 0.300 0.125 0.100 0.060 0.050 Maximum Power (*2) W 1.32 1.
PAGE 3
CC1R5-E MODEL CC1R5-2403Sx-E CC1R5-2405Sx-E CC1R5-2412Sx-E CC1R5-2412Dx-E ITEMS/UNITS Nominal Voltage V DC24 Voltage Range V DC18-36 Input Efficiency (typ) (*1) ％ 72 77 81 79 Current (typ) (*1) A 0.076 0.081 0.077 0.079 Nominal Voltage VDC 3.3 5 12 15 12 15 Maximum Current A 0.400 0.300 0.125 0.100 0.060 0.050 Maximum Power (*2) W 1.32 1.
PAGE 4
CC1R5-E Outline Drawing CC1R5-xxxxxF-E (DIP type) 16.6±0.2 Recommended measurements for mounting board 13.08 12.7 16.51 5 7-0.3×0.6 2-ø1.5 (land diameter ø2.5) 6 7 a 1 b 3.5 2 7-ø1.0 (land diameter ø2.0) 16.51 1.0 0.5 b 4 2.7 a Outer shape of product 0.5 1.905 2.54 5.08 2.54 (3.22) 12.7 a 3 7.62 2.54 (3.22) 1.905 10.16 3.5 t=0.3 2.54 5.08 2.54 2.92 14.605 7.62 8.5max. 4.0 Shape/Dimensions b Unit: mm Allowable tolerance is ±0.5 if not specified separately. 2.
PAGE 5
CC3-E（DIP/SMD） 5 CC3-E Specifications MODEL CC3-0503Sx-E CC3-0505Sx-E CC3-0512Sx-E CC3-0512Dx-E ITEMS/UNITS Nominal Voltage V DC5.0 Voltage Range V DC4.5-9.0 Input Efficiency (typ) (*1) ％ 73 77 82 81 Current (typ) (*1) A 0.723 0.779 0.732 0.741 VDC 3.3 5 12 15 12 15 Nominal Voltage Maximum Current A 0.800 0.600 0.250 0.200 0.125 0.100 Maximum Power (*2) 2.
PAGE 6
CC3-E（DIP/SMD） MODEL CC3-2403Sx-E CC3-2405Sx-E CC3-2412Sx-E CC3-2412Dx-E ITEMS/UNITS Nominal Voltage V DC24 Voltage Range V DC18-36 Input Efficiency (typ) (*1) ％ 73 78 82 81 Current (typ) (*1) A 0.151 0.160 0.152 0.154 VDC 3.3 5 12 15 12 15 Nominal Voltage Maximum Current A 0.800 0.600 0.250 0.200 0.125 0.100 Maximum Power (*2) W 2.
PAGE 7
CC3-E（DIP/SMD） 7 Outline Drawing CC3-xxxxxF-E (DIP type) 16.6±0.2 Recommended measurements for mounting board 2.92 20.32 2.54 a 2-ø1.5 (land diameter ø2.5) 2 5 6 7 1 b 22.86 1.0 0.5 4 7.62 3 3.5 b 7-0.3× 0.6 (3.22) 2.7 a 7-ø1.0 (land diameter ø2.0) 0.5 17.78 2.54 5.08 2.54 2.54 (3.22) 2.54 Outer shape of product 2.54 5.08 2.54 13.08 17.78 22.86 10.16 3.5 t=0.3 7.62 8.5max. 4.0 Shape/Dimensions b 2.7 Unit: mm Allowable tolerance is ±0.5 if not specified separately.
PAGE 8
CC3-E（SIP） 8 CC3-E Specifications MODEL CC3-0503SS-E CC3-0505SS-E CC3-0512SS-E CC3-0512DS-E ITEMS/UNITS Nominal Voltage V DC5.0 Voltage Range V DC4.5-9.0 Input Efficiency (typ) (*1) ％ 73 77 82 81 Current (typ) (*1) A 0.723 0.779 0.732 0.741 VDC 3.3 5 12 15 12 15 Nominal Voltage Maximum Current A 0.800 0.600 0.250 0.200 0.125 0.100 Maximum Power (*2) W 2.
PAGE 9
CC3-E（SIP） MODEL CC3-2403SS-E CC3-2405SS-E CC3-2412SS-E CC3-2412DS-E ITEMS/UNITS Nominal Voltage V DC24 Voltage Range V DC18-36 Input Efficiency (typ) (*1) ％ 73 78 82 81 Current (typ) (*1) A 0.151 0.160 0.152 0.154 VDC 3.3 5 12 15 12 15 Nominal Voltage Maximum Current A 0.800 0.600 0.250 0.200 0.125 0.100 Maximum Power (*2) W 2.
PAGE 10
CC3-E（SIP） 10 Outline Drawing CC3-xxxxxS-E (SIP type) Shape/Dimensions 17.9 9.2 (0.5) 3.5 (0.5) 4.1 2.47 P P P P 2P P P P P 22.86 2.47 6 17.78 P=2.54 27.8 4 5 7 8 9 10 a 27.8 0.5 3 9.2 2 5.01 Recommended measurements for mounting board a 1 1(t=0.3) 2.47 4 22.86 2.47 17.78 2-ø1.5 (land diameter ø2.5) P Unit: mm Allowable tolerance is ±0.5 if not specified separately. P P P 2P P P P 6.0 SMD mounting space 9.2 P=2.54 9-ø0.8 (land diameter ø2.
PAGE 11
CC6-E CC6-E Specifications MODEL CC6-0503Sx-E CC6-0505Sx-E CC6-0512Sx-E CC6-0512Dx-E ITEMS/UNITS Nominal Voltage V DC5.0 Voltage Range V DC4.5-9.0 Input Efficiency (typ) (*1) ％ 76 79 82 Current (typ) (*1) A 1.042 1.266 1.463 VDC 3.3 5 12 15 12 15 Nominal Voltage Maximum Current A 1.200 1.000 0.500 0.400 0.250 0.200 Maximum Power (*2) W 3.
PAGE 12
CC6-E MODEL CC6-2403Sx-E CC6-2405Sx-E CC6-2412Sx-E CC6-2412Dx-E ITEMS/UNITS Nominal Voltage V DC24 Voltage Range V DC18-36 Input Efficiency (typ) (*1) ％ 77 81 87 86 Current (typ) (*1) A 0.214 0.309 0.287 0.291 VDC 3.3 5 12 15 12 15 Nominal Voltage Maximum Current A 1.200 0.500 0.400 0.250 0.200 Maximum Power (*2) W 3.
PAGE 13
CC6-E Outline Drawing CC6-xxxxxF-E (DIP type) 21.1±0.2 Recommended measurements for mounting board 20.32 2.63 8.5max. 4.0 Shape/Dimensions 10.16 5.08 17.78 15.24 17.87 3.5 t=0.3 5.08 Outer shape of product 7-ø1.0 (land diameter ø2.0) a b 2.7 0.5 2.54 4 5.08 7-0.3×0.6 2 22.86 1.0 5 a 5.08 10.16 2-ø1.5 (land diameter ø2.5) 3.5 b 3 0.5 5.08 (2.93) 2.54 5.08 22.86 2.7 5.08 6 (2.93) 1 Unit: mm Allowable tolerance is ±0.5 if not specified separately.
PAGE 14
CC10-E CC10-E Specifications MODEL CC10-0503Sx-E CC10-0505Sx-E CC10-0512Sx-E CC10-0512Dx-E ITEMS/UNITS Nominal Voltage V DC5.0 Voltage Range V DC4.5-9.0 Input Efficiency (typ) (*1) ％ 84 83 Current (typ) (*1) A 1.964 2.381 2.286 2.313 VDC 3.3 5 12 15 12 15 Nominal Voltage Maximum Current A 2.500 2.000 0.800 0.640 0.400 0.320 Maximum Power (*2) W 8.25 10 9.
PAGE 15
CC10-E MODEL CC10-2403Sx-E CC10-2405Sx-E CC10-2412Sx-E CC10-2412Dx-E ITEMS/UNITS Nominal Voltage V DC24 Voltage Range V DC18-36 Input Efficiency (typ) (*1) ％ 84 86 87 86 Current (typ) (*1) A 0.409 0.484 0.575 0.523 VDC 3.3 5 12 15 12 15 Nominal Voltage Maximum Current A 2.500 2.000 1.000 0.800 0.450 0.360 Maximum Power (*2) W 8.25 10 12 10.
PAGE 16
CC10-E Outline Drawing CC10-xxxxxF-E (DIP type) Recommended measurements for mounting board 30.48 25.4 Outer shape of product 5.08 5.08 5.08 18.62 3.5 t=0.3 15.24 4.0 8.5max. 22.6±0.2 10.16 3.38 Shape/Dimensions 7-ø1.0 (land diameter ø2.0) 35.56 25.4 5.08 2-ø1.5 (land diameter ø2.5) 0.5 5.08 a 4 5 6 7-0.3×0.6 1 b a 7 b 2.7 0.5 (3.68) 10.16 2 2.7 3.5 3 b 5.08 5.08 5.08 5.08 (3.68) 35.56 a Unit: mm Allowable tolerance is ±0.5 if not specified separately. 1.
PAGE 17
CC15-E CC15-E Specifications MODEL CC15-2403Sx-E CC15-2405Sx-E ITEMS/UNITS Nominal Voltage V DC24 Voltage Range V DC18-36 Input Efficiency (typ) (*1) ％ 89 Current (typ) (*1) A 0.695 0.702 VDC 3.3 5 Nominal Voltage Maximum Current A 4.500 3.000 Maximum Power (*2) W 14.
PAGE 18
CC15-E Outline Drawing CC15-xxxxxSF-E (DIP type) Recommended measurements for mounting board 6.075 27.33 25.4 6.075 37.55 17-0.3×0.6 b a 10.16 2-ø1.5 (land diameter ø2.5) 1.0 b 6.075 31.475 P=2.54 37.55 2.7 17 a 0.5 11 12 13 14 15 16 25-ø1.0 (land diameter ø2.0) 3.5 b Outer shape of product 0.5 a 2.54 10 9 8 7 6 5 4 3 2 1 2.7 22.86 t=0.3 10.16 3.0 (4.62) 2.54 (4.62) P P P P P P P P 4.47 32.1 7.0max. 38.1 P P P P P Shape/Dimensions Unit: mm Allowable tolerance is ±0.
PAGE 19
CC25-E CC25-E Specifications MODEL CC25-2403Sx-E CC25-2405Sx-E ITEMS/UNITS Nominal Voltage V DC24 Voltage Range V DC18-36 Input Efficiency (typ) (*1) ％ 90 Current (typ) (*1) A 1.146 1.157 Nominal Voltage VDC 3.3 5 Maximum Current A 7.500 5.000 Maximum Power (*2) W 24.
PAGE 20
CC25-E Outline Drawing CC25-xxxxSF-E (DIP type) Shape/Dimensions Recommended measurements for mounting board 43.2 30.5 5.08 PPPPP 6.075 6.075 6 5 4 3 2 1 35.56 PPP 6.075 36.575 42.65 P=2.54 25 b a Unit: mm Allowable tolerance is ±0.5 if not specified separately. Recommended measurements for mounting board 43.2 7.5max. 4.52 44.9 Outer shape of product 35.56 40.08 (4.67) 48.1 25 Terminal connections –Vout No.1 No.2 No.3 No.4 No.5 No.6 No.7 No.8 No.
PAGE 21
CC-E CC-E Instruction Manual 1. Control functions/Protection functions/Connections 1. Remote On/Oﬀ terminal (RC) 1.5-10W type Open collector is recommended as the connection system. Consult us for use with other systems. Use a transistor with "VCE: Vin or over" and "Ic: 1mA or over". Output is switched oﬀ by setting the RC terminal open, and switched on by setting the RC terminal to LOW (0-0.4V).
PAGE 22
CC-E Adding a resistance Rb between TRM terminal and 24V single output by making the COM terminal and TRM +Vout terminal, to set the output voltage low terminal open. And output voltage can be set to 30V single *5 Vout = 3.3 - 15.53/(39.6+Rb) [Rb ≧ 62] output by making the COM terminal open and connecting *6 Vout = 5.01 - 52.55/(31.8+Rb) [Rb ≧ 160] the TRM terminal to the -Vout terminal. *7 Vout = 12.01 - 431.1/(57+Rb) [Rb ≧ 620] *8 Vout = 12.02 - 968.
PAGE 23
CC-E Calculating connected resistance Ra, Rb (kΩ) from set output voltage Vout (V) 1-5. Over voltage protection Adding a resistance Ra between TRM terminal and -Vout An over voltage protection function is not incorporated in terminal, to set the output voltage high the model. Be careful if an external voltage over the nomi- *1 *2 *3 *4 Ra Ra Ra Ra = = = = 1.04/(Vout-3.3) - 2.83 12.75/(Vout-5) - 12.69 48.4/(Vout-12) - 16.18 54.7/(Vout-12) - 18 nal voltage is applied, damage may be caused. 1-6.
PAGE 24
CC-E 2. Noise reduction methods 2-1. Ripple noise measurement method 2-3. Output ripple & noise The measured value of the converter noise may diﬀer depending on the measurement method. Measurement should be conducted in a position close to the output terminal. When connecting a prove, do not allow a loop to be conﬁgured in order not to pick up ﬂux. As well, note that the spike voltage greatly diﬀers depending on the ripple voltmeter and frequency band of the oscilloscope.
PAGE 25
CC-E 2-5. Common mode noise 2-6. Radiation noise For products other than with 10W, capacitors are not con- Radiation noise of the converter can be reduced by con- nected between the primary GND and the secondary GND. necting the case terminal to the input or output GND ter- To reduce common mode noise, connect a capacitor with around 1000pF between the primary GND and the secondary GND, as shown in the ﬁgure below.