Datasheet

ManualsBrandsTDK-LAMBDA ManualsPSU ComponentsDC/DC converter (print) 24 Vdc 3.3 Vdc 1.2 A 6 W No. of outputs: 1 x

1371-800-526-2324 • www.us.tdk-lambda.com/lp/ Disclaimer: us.tdk-lambda.com/lp/legal.htm

CC-E Series

Features

 Compact Footprint / Low Proﬁ le

 Through Hole or SMT Versions

 5V, 12V, 24V & 48V Inputs

 3.3 to 30V

Single, ±12 to 15V Dual Outputs

 Output Voltage Adjustment

 Input - Output Isolation

 RoHS Compliant

 5 Year Warranty

 Self contained

 Multiple Input Voltage conﬁ gurations

 Open frame (no potting)

1.5-25W, Ultra Compact Single and Dual DC-DC Converters

1. For 24V/30V output - connnect across +Vout & -Vout and

leave “common out” pin not connected

2. Based upon equal load current from both outputs

3. For 15V output connect trim to -Vout

4. See Installation Manual for full specs, test methods of

parameters & application notes

5. Not available on CC15 and CC25 models

Model

Nominal Output Voltage V 3.3V 5V 12/15V ±12/15 (24/30)

DC Input V 5V: 4.5-9.0V, 12V: 9-18V, 24V: 18-36V, 48V: 36-76V

Efﬁ ciency % 71 to 90% model dependant

Output Voltage Tolerance % 1.5-10W: ±3%, 15-25W: ±5% ±5%

Output Adjustment (via trim pin) V 3.15-3.6V (5) 4.75-6.0V (5) 11.4-15V 22.8 - 30V

Line Regulation mV 20 (40 CC15; 30 CC25) 40 80

Load Regulation mV 40 (120 CC15; 200 CC25) 100 600

Temperature Coefﬁ cient % <± 0.02%/°C

Preload - No preload required

Output Ripple (typ./max.BW 50MHz) mV 40/120 30/120

Overcurrent Protection - Output current limiting with automatic recovery, shutdown CC15, 25 type

Overvoltage Protection - No

Remote On/ Off - CC1R5, 3, 6, & 10: RC terminal open, output is OFF; RC terminal to -Vin (0-0.4V), output is ON

CC15 & CC25: RC terminal open, output is ON; RC terminal to +Vin, output is OFF

Operating Temp.- Convection °C -40 to 85°C, derates linearly to 40% load from 50°C to 85°C

Operating Temp.- Forced Air °C -40°C to 85°C with 1m/s air full load

Storage Temperature °C -40°C to 85°C

Humidity (non Condensing) - 95% RH max.(maximum wet-bulb temperature: 38°C)

Isolation Voltage - 500VAC 1 min. Input to output, input to case, output to case

Isolation Resistance - Input to output, input to case, output to case: 50M ohm min. (500VDC)

Shock m/s

980m/s

(100G) 6ms (6 directions, each 3 times)

Vibration (non Operating) - 10 to 55Hz (sweep for 15min) 1.52mm constant, 3 directions X, Y, Z each 2 hours

Safety Agency Approvals - UL60950-1, CSA60950-1, EN60950-1, CE Mark

Weight g CC1R5: 3.2, CC3: 4.5, CC6: 5.8, CC10:10.0, CC15: 12.5, CC25: 20.0

Size (L x W x H) in CC1R5: 0.650 x 0.654 x 0.335; CC3: 0.900 x 0.654 x 0.335; CC6: 0.900 x 0.831 x 0.335

(DIP Through Hole and SMD package) CC10: 1.400 x 0.890 x 0.335; CC15: 1.500 x 1.264 x 0.295; CC25: 1.701 x 1.768 x 0.295

(SIP Through Hole only) CC3 (SIP): 1.09 x 0.362 x 0.705

Warranty yrs 5 years

Speciﬁ cations

Key Market Segments & Applications

Summary of content (2 pages)

PAGE 1
CC-E Series 1.5-25W, Ultra Compact Single and Dual DC-DC Converters Features  Compact Footprint / Low Profile  Through Hole or SMT Versions  5V, 12V, 24V & 48V Inputs  3.3 to 30V1 Single, ±12 to 15V Dual Outputs  Output Voltage Adjustment  Input - Output Isolation  RoHS Compliant  5 Year Warranty  Self contained  Multiple Input Voltage configurations  Open frame (no potting) Key Market Segments & Applications Specifications Model V 3.3V 5V 12/15V ±12/15 (24/30)1 V 5V: 4.5-9.
PAGE 2
CC-E Series Model Selector Output Output Output Voltage (V) Current (A) Power (W) Single Outputs 3.3 0.4 1.5 3.3 0.8 3 3.3 1.2 6 3.3 2.5 10 3.3 4.5 15 3.3 7.5 25 5 0.3 1.5 5 0.6 3 5 1.0 5 5 1.2 6 5 2.0 10 5 3.0 15 5 5.0 25 12(15) 0.125(0.1) 1.5 12(15) 0.25(0.2) 3 12(15) 0.5(0.4) 6 12(15) 0.8(0.64) 10 12(15) 1.0(0.8) 10 Dual Outputs ±12 (15)3 0.06(0.05) 1.5 ±12 (15)3 0.125(0.1) 3 ±12 (15)3 0.25(0.2) 6 ±12 (15)3 0.4(0.32) 10 ±12 (15)3 0.45(0.