Information

・All specifications are subject to change without notice.
19
CC25-E Specifications
MODEL
ITEMS/UNITS
CC25-2403Sx-E CC25-2405Sx-E
Input
Nominal Voltage V DC24
Voltage Range V DC18-36
Efficiency (typ) (*1) ％ 90
Current (typ) (*1) A 1.146 1.157
Output
Nominal Voltage VDC 3.3 5
Maximum Current A 7.500 5.000
Maximum Power (*2) W 24.75 25
Maximum Line Regulation (Within input voltage range) mV 65 100
Maximum Load Regulation (0-100% load) mV 120 200
Temperature Coefficient
(Ambient temperature -40℃ to +50℃ )
80mV
Max Power Total Regulation (ma
x) (*3) ％ +5/-3
Maximum Ripple & Noise (typ/max) (*4) mVp-p 40/120
Voltage Adjustable Range
VDC Not available
Function
Over Current Protection (*5) Available
Over Voltage Protection Not available
Remote ON/OFF Control Available
Environment
Operating Temperature ℃ -40 to +85
Storage Temperature ℃ -40 to +85
Operating Humidity
％ RH 5-95 (the conditions of maximum 38℃ in wet bulb temperature and non-condensation should be ensured.)
Storage Humidity
％ RH 5-95 (the conditions of maximum 38℃ in wet bulb temperature and non-condensation should be ensured.)
Vibration 10-55Hz, 15 minutes sweep and 1.52mm total amplitude, 3 directions, 2h for each
Shock 980m/s² (100G), 6ms, 3 directions, 3 times for each, in non-operation
Isolation
Withstand Voltage Between input terminal and case, between input terminal and output terminal, and between output terminal and case: 500VAC (for 1 minute)
Isolation Resistance Between input terminal and case, between input terminal and output terminal, and between output terminal and case: 500VDC, 50MΩ min
Standards Safety Standards UL60950-1, CSA C22.2 No.60950-1 (C-UL), EN60950-1 (NEMKO)
Mechanical
Weight (typ) g 20
Size (W x H x D) mm DIP: 42.65 x 7.0 x 44.9 / SMD: 42.65 x 7.5 x 44.9
Note: "x" in
model names is to be replaced by a symbol which represents the terminal configuration (F: DIP/R: SMD) for actual model names.
Note: With nominal input/output voltage, maximum output current, and Ta=25°C, if not specified separately.
(*1) With nominal input voltage, maximum output current, and Ta=25°C.
(*2) The maximum output power value is between -40°C and +50°C. For use in outside this temperature
range, derating is needed.
(*3) Output voltage includes input change, load change (balanced load), and temperature change.
(*4) In 50MHz, Ta=25°C.
(*5) Latch method Resumes by restarting input or resetting remote on/off.
CC25-E