Instructions

7. Mounting
Carefully insert the instrument into the panel cut-out. Insert the mounting bracket
from the back and push towards the panel until the instrument sits tight. Make sure
the mounting bracket is snapped into the side of the housing. To ensure IP65
protection (dust and water jet) when mounting in a front panel, use optional gasket
(separately available).
8. Specifications
DPM72-MPP
Supply
10 - 24 V AC/DC or via USB (min. 5 V),
galvanically isolated
Display LCD graphic display 192 × 160 pixels
Measuring range voltage 0/2 bis 10 V DC (max. 30 V)
Accuracy voltage ±0,5 % true RMS
Internal resistance voltage 102 kΩ
Measuring range ampere 0/4 bis 20 mA DC (max. 100 mA)
Accuracy ampere ±0,5 % true RMS
Internal resistance ampere 6,2 Ω
Recording of measurement 3 minutes to 14 days
Alarm outputs 2 optocoupler outputs max. 30 V DC, 50 mA
Operating temperature 0 °C to +50 °C
Storage temperature -20 °C to +70 °C
Dimensions 72 mm × 72 mm × 58 mm
Panel cut-out 68 mm × 68 mm
Depth
50 mm (without plugs), 58 mm (with plugs, cable
direction rear facing)
Protection front IP65 from the front
9. Cleaning
Observe the safety instructions before cleaning the instrument. Clean the
instrument with a dry lint-free soft cloth. Do not use solvents.
10. Contact Information
TDE Instruments GmbH, Gewerbestraße 8, D-71144 Steinenbronn
phone: [phone]
E-Mail: [e-mail]
Internet: www.tde-instruments.de, www.digalox.com
----- 8 -----