Instructions
4" ,,
• Measurement of current, voltage, power and frequency in the specified measuring
ranges.
• Indoor use non condensing, non corrosive.
• Panel mounting.
• In operation, supply the device preferably via screw terminals with 12 to 24;V
AC/DC. If the device is supplied via USB in operation, USB supply voltage must
be at least 5;V.
• Failure to comply with these instructions will void all guarantee and warranty.
5" +
The multi display with RGB backlight is able to display up to four parameters
simultaneously. Thresholds can be associated with individual warning backlight
colours. A variety of measurement modes (volt AC/DC, ampere AC/DC via external
shunt, frequency, power, cos phi) are supported. The unit can be switched between
measurement modes via an external switch. Minimum and maximum values of up to
four parameters are recorded and can be displayed optionally using an external
switch. Measured values of one parameter are recorded over a time span of 36
seconds up to 14 days. The time base as well as the display of the measuring
history can be activated by an external switch. The measured values remain stored
as long as the device is supplied with voltage.
The following parameters can be adjusted using the configuration software “Digalox
Manager”: scale endpoint, scale caption, display style (pointer, tachometer, bar
graph, and more), splash image, backlight colour, thresholds for alarm output,
threshold warning colour (light, blink), hysteresis, and more. Recorded
measurement values can be read and a continuous transmission of up to four
measurement values can be enabled. Using the software, values can be viewed and
exported as CSV file. Depending on the model, measured values can be transmitted
via USB, XBEE radio technology or RS485 Modbus interface. In addition, the
devices feature a counting function with data retention. This enables operating-
hours-counters or time-counters for exceeding and falling below threshold values, as
well as ampere-hour and energy meters.
Visit ..."," to download the software “Digalox Manager”.
-----23-----