Data Sheet

Extensive adaptability via software
Using the "Digalox® Manager" configuration software,
the measuring devices can be set up individually - for
example, it is possible to upload own texts or a
customer-specific splash screen. Individually
adjustable threshold values can be assigned to
various colour warnings, for example the display can
glow blue or flash red. Scale deflexion and labeling,
display designs, as well as measured value scaling
and linearization can be adjusted as required. The
measured values can be graphically evaluated within
the software and exported as a CSV file.
Interfaces & measurement data recording
All DPM72 measuring instruments record the
measured data over a time period of three minutes up
to 14 days. The data transfer from the DPM72-MP
and -MPN models takes place via a galvanically
isolated USB interface in realtime. As of 2020 the
additionally available instruments Digalox
®
DPM72-
MP+ and DPM72-MPN+ expand the field of
application with additional interfaces: this enables
continuous data transmission not only via USB but
also wirelessly via radio (2.4 GHz mesh network) as
well as via RS485-Modbus-interface.
Switching outputs
Two galvanically isolated alarm outputs enable the
device to trigger an alarm as individually adjustable
threshold values are reached. The user can be made
aware of special events such as exceeding a
maximum value by flashing in colour or lighting up.
The adjustable hysteresis function can be used to
control simple on and off switches.
Housing variants
USB
Galvanically isolated
supply 5 V
Modbus
3 x 3,5 mm RS485
XBEE
Wireless transmission
via 2,4 GHz mesh
network
Without display
Mounting on DIN rail for
XBEE and Modbus
Specifications at www.digalox.com
TDE Instruments GmbH
Gewerbestraße 8
D-71144 Steinenbronn
Germany
Tel.: [phone]
Fax: [phone]
Email: [e-mail]
Web: www.digalox.com