Datasheet

Digalox DPM72-AVP
Graphical DIN-panelmeter for Voltage and Ampere
with USB interface
TDE Instruments GmbH
Gewerbestraße 8
D-71144 Steinenbronn
Germany
Tel.: [phone]
Fax: [phone]
Email: [e-mail]
Web: www.digalox.com
Description
Graphical measuring instrument which unites the benefits
of an analogue display with the accuracy of a digital
instrument. The common measure modes (Volt AC/DC,
Ampere, frequency, analog signal 0/2 to 10 Volts and
5A current transformer) are supported. Scale-endpoint
of the indicator as well as scaling of the analog signal
and current transformer measurement can be adjusted
freely via the DIP-switch, alternatively there is an option
for automatic adaption of the scale-endpoint. The unit
can be switched between Volt and Ampere measurement
via an external switch. Minimum and maximum values
are recorded and can be displayed optionally using an
external switch. Measured values are recorded over a
timespan of 3 minutes to 14 days. The timebase as well
as the display of the measuring history can be activated
by an external switch. The following parameters can be
adjusted using the USB-Software: Scale-endpoint, scale-
caption, display-style (pointer, tachometer, bargraph and
more), splash display, thresholds for alarm output,
hysteresis and more. Recorded measurement values
can be read as well as a continuous transmission of the
actual measuring value enabled. Using the software,
values can be viewed, recorded and be exported as
CSV.
Features
• Graphic display 16 grey levels with white backlight
• Pointer and digital display
• USB interface
• Adjustable scale-endpoint
• Recording of measurement over up to 14 days
• Alarm outputs with adjustable thresholds, galvanically isolated
• User splash display
• Different display styles, e.g. tachometer, bargraph, timebased view
• Transmission of measure value
• Supply 10-30V AC/DC or USB, galvanically isolated
• Accuracy 1% (0,5%) true RMS
• Windows software for individual configuration and measure value recording
Adjustable display styles