Datasheet

TDE Instruments GmbH
Gewerbestraße 8
D-71144 Steinenbronn
Germany
Tel.: [phone]
Fax: [phone]
Email: [e-mail]
Web: www.digalox.com
Description
Graphical measuring instrument which unites the benefits
of an analogue display with the accuracy of a digital
instrument. The common measuring modes (Volt AC/DC,
Ampere, frequency, analog signal 0/2 to 10 Volts and
5A current transformer) are supported. Scale-endpoint
of the indicator as well as scaling of the analog signal
and current transformer measurement can be adjusted
freely via the DIP-switch, alternatively there is an option
for automatic adaption of the scale-endpoint. The unit
can be switched between Volt and Ampere measurement
via an external switch. Minimum and maximum values
are recorded and can be displayed optionally using an
external switch. Measure values are recorded over a
timespan of 3 minutes to 14 days. The timebase as well
as the display of the measuring history can be activated
by an external switch.
Features
• Graphic display 16 grey levels with white backlight
• Pointer and digital display
• Adjustable scale-endpoint
• Recording of measurement over up to 14 days
• Supply 10-30V AC/DC
• Accuracy 1% (0,5%) true RMS
Digalox DPM72-AV
Graphical DIN-panelmeter for Voltage and Ampere
Specification
Supply:
10-30V AC/DC
Display:
LCD graphic display 192x160 pixels
Measuring range voltage:
AC 0-500V
DC +/-500V
DC 0/2-10V DC for analog signal
Accuracy Voltage:
1% (0,5%)
Measuring range Ampere:
AC 0-10A
AC 5A for current transformer
DC +/-10A
Accuracy Ampere:
1% (0,5%)
Measuring range frequency:
10-500Hz
Accuracy frequency:
0,1Hz
Recording of measurement:
3 Min. to 14 days
Operating temperature:
0°C to +50°C
Storage temperature:
-20°C bis +70°C
Front panel:
72 mm x 72 mm
Panel cut out:
68 mm x 68 mm
Fixation:
Bracket
Protection front:
IP65