Instructions

----- 8 -----
7. Mounting
Carefully insert the instrument into the panel cutout. Insert the mounting bracket
from the back and push towards the panel until instrument sits tight. Make sure the
mounting bracket is snapped into the side of the housing. To ensure IP65
protection (dust and water jet) when mounting in a front panel, use optional gasket.
8. Specifications
DPM72PP
Supply
10-24V AC/DC or via USB (min. 5V), galvanically
isolated
Display LCD graphic display 192x160 Pixel
Measuring range voltage
50/60mV DC shunt
Accuracy voltage 0,50%
Measuring range ampere
0/4 to 20mA DC analogue signal
Accuracy ampere 0,50%
Measuring range frequency -
Accuracy frequency -
Recording of measurement 3 min to 14 days
Alarm outputs
2 optocouple outputs max. 30V, 50mA
Operating temperature 0°C to +50°C
Storage temperature -20°C to +70°C
Front panel 72 mm x 72 mm
Panel cut out 68 mm x 68 mm
Protection front IP65 from the front
9. Cleaning
Observe the safety instructions before cleaning the instrument. Clean instrument
with a dry lint-free soft cloth. Do not use solvents.
10. Contact Information
TDE Instruments GmbH, Gewerbestraße 8, D-71144 Steinenbronn
phone: [phone]
E-Mail: [e-mail]
Internet: www.tde-instruments.de, www.digalox.com