Instructions

----- 2 -----
3. Description
The measuring modes analogue signal 0/4 to 20 mA and 60mV DC shunt are
supported. Scale-endpoint of the indicator as well as scaling of the analogue signal
and current transformer measurement can be adjusted freely via the DIP-switch,
alternatively there is an option for automatic adaption of the scale-endpoint. The
unit can be switched between volt and ampere measurement via an external
switch. Minimum and maximum values are recorded and can be displayed
optionally using an external switch. Measured values are recorded over a time
span of 3 minutes up to 14 days. The time base as well as the display of the
measure history can be activated by an external switch.
The following parameters can be adjusted using the USB-Software: Scale-
endpoint, scale-caption, display-style (pointer, tachometer, bar graph, and more),
splash display, thresholds for alarm output, hysteresis, and more. Recorded
measurement values can be read and a continuous transmission of the actual
measuring value can be enabled. Using the software, values can be viewed and
exported as CSV.
Front
1 Unit or free text
2 Threshold value
3 Upper scale caption
4 Graphical measurement display
5 Digital measurement value
6 Lower scale caption
Back
1 2 optocoupler switch outputs
2 DIP switch for setting measurement
mode and upper scale caption
3 Supply voltage input
4 Jumpers for configuration or connection
external switch for activating/switching
measurement mode, graphical historic
data display, min/max display, auto-
scaling
5 USB interface for alternative power
supply and software communication
interface
6 Measurement inputs