Instructions

 
Carefully insert the device into the panel cut-out. Insert the mounting bracket from
the back and push towards the panel until the device sits tight. Make sure the
mounting bracket is snapped into the side of the housing. To ensure IP65
protection (dust and water jet) when mounting in a front panel, use optional gasket
(separately available).
D $

Supply
12 - 24 V AC/DC ±10% or via USB (min. 5 V),
galvanically isolated
Power consumption Max. 2.4 W
Display LCD graphic display 192 × 160 pixels
Measuring range voltage ±500 V AC/DC, 10 - 500 Hz
Accuracy voltage ±1 % true RMS
Internal resistance voltage 2.6 MΩ
Measuring range ampere
±10 A AC/DC and 5 A AC for current transformer,
10 - 500 Hz
Accuracy ampere ±1 % true RMS
Internal resistance ampere 5 mΩ
Measuring range frequency 10 - 1000 Hz
Accuracy frequency ±0.1 Hz
Recording of measurement 3 mins. to 14 days
Alarm outputs 2 optocoupler outputs max. 30 V DC, 50 mA
Operating temperature 0 °C to +50 °C
Storage temperature -20 °C to +70 °C
Dimensions 72 mm × 72 mm × 58 mm
Panel cut-out 68 mm × 68 mm
Depth
50 mm (without plugs), 58 mm (with plugs, cable
direction rear facing)
Protection front IP65 from the front
@ /
Observe the safety instructions before cleaning the device. Clean the device with a
dry lint-free soft cloth. Do not use solvents.
5 /
TDE Instruments GmbH, Gewerbestraße 8, D-71144 Steinenbronn
phone: [phone]
E-Mail: [e-mail]
Internet: www.tde-instruments.de, www.digalox.com
----- D -----