Instructions

6. Other settings
The following functions can
connectors J1-J3 by
jumper
----- 7 -----
The following functions can
be activated
independently
jumper
or switch during operation:
J1:
Graphical historic data display
To activate the graphical historic data display
connector J1 is shorted. The unit displays the
stored values within the set time base as a
graphical trend.
The time base can be
hours (6, 12, 24, 48, 72
) or
60).
The time base can
be changed by
opening and closing
J1 (interval
When first opening
and closing
time base is displayed.
opening and closing the time base
the next setting.
In order
permanently,
DIP switch 10 must be switched
from ON to OFF position.
J2: Min-Max-display
To activate the Min-
Max display connector J2
is shorted. The display
and minimum values recorded since the last
reset. The values can be reset by opening and
closing connection J2 shortly (interval < 2 sec).
The display shows "minmax reset".
J3: Auto-scaling
To activate auto-
scaling J3 connector is
sho
rted. The device automatically changes the
upper scale caption depending on the current
measuring value in steps of 10, 100 and the
set of top scale caption.
independently
by short-circuiting
Graphical historic data display
To activate the graphical historic data display
connector J1 is shorted. The unit displays the
stored values within the set time base as a
set to days (7, 14),
) or
minutes (3, 15, 30,
be changed by
alternatingly
J1 (interval
< 2 sec).
and closing
J1 the current
For each subsequent
opening and closing the time base
changes to
In order
to save the setting
DIP switch 10 must be switched
from ON to OFF position.
Max display connector J2
is shorted. The display
shows the maximum
and minimum values recorded since the last
reset. The values can be reset by opening and
closing connection J2 shortly (interval < 2 sec).
The display shows "minmax reset".
scaling J3 connector is
rted. The device automatically changes the
upper scale caption depending on the current
measuring value in steps of 10, 100 and the