User's Manual

Ultra Wideband Perimeter Surveillance Pole / User’s Manual 17
4. Broadspec Antenna
The P400 is designed to operate with the Broadspec antenna shown in Figure 16. Use with
ANY other antenna invalidates the FCC certification. Per FCC 15.203, the Broadspec antenna
must be professionally installed and the installer has the responsibility to insure that the
Broadspec antenna is used.
The P400 can be operated with a single antenna (used for transmit and receive) or with two
antennas (where one is dedicated for transmit and the second for receive).
The Broadspec antenna (~3dBi) provides an omni-directional transmit/receive pattern
supporting a frequency range of 3.1-5.3 GHz. It has a standard SMA female connector and
measures 1” x 2.5” x 0.125”. Specifications are available on the web at:
http://www.timedomain.com/datasheets/TD_Broadspec_Antenna.pdf
Figure 16: Broadspec Antenna