User Manual

PLUS System Manual System Installation 43
Proprietary Information: Do not disclose unless authorized under a Nondisclosure Agreement and the Partner Agreement.
use a given Calibration Tag reliably. Next, you should enter your list of reliable Tag-Reader
combinations into Visualizer to enable robust calibration.
Click the Calibrate button to open the Calibration window. Under the Options menu, open the Set
tag-reader associations selection. Use the pull-down lists for Readers and Tags to add the desired
combinations to the list. Make sure that the Include the listed Reader-Cal Tag radio button is
checked so that only the specified combinations will be used for calibration. Click OK when
complete. To check that the correct associations were made, turn on the Calibration Assist mode
from the Options menu, and verify that a line has been drawn between correct Tags and Readers.
Figure 2-35: Tag-Reader Associations
Figure 2-36: Tag-Reader Associations Shown in Cal Assist Mode