User Manual

38 System Installation PLUS System Manual
Proprietary Information: Do not disclose unless authorized under a Nondisclosure Agreement and the Partner Agreement.
2.4.12 Cable Length and Termination Settings
With the 2.0 Reader, cable length and termination settings are automatic, and these columns are for
user information only.
2.4.13 System Configuration Files
Under the File menu, select Save Config As… to create a new configuration folder. A PLUS
configuration consists of two files. Trackerconfig.txt is used by the Location Engine to store survey
information, calibration data and other system parameters. Visualizerconfig.txt stores map image file
parameters and tag name assignments. Do not edit these files manually; instead use Visualizer to
make changes to the configuration. Opening and saving a configuration from Visualizer is done by
referencing the folder containing the two configuration files rather than specifying the files
themselves.
The 2.0 Location Engine can read earlier versions of the configuration file. Simply rename the
configuration file to trackerconfig.txt, and use Visualizer to open the directory containing this file.