User Manual

PLUS System Manual System Installation 37
Proprietary Information: Do not disclose unless authorized under a Nondisclosure Agreement and the Partner Agreement.
Under the Member Groups frame, click on a Reader group and use the direction arrows to add or
remove it from the selected map.
Under the Tracking Cell frame:
 To define a tracking cell for the map, click the Enter Polygon button in the Tracking Cell frame.
Click on the map display to place vertices of the polygon. As each vertex is placed, the polygon
will automatically draw a line to the original vertex to close the area. When finished, click the
Exit Polygon Mode button.
 Click Use tracking cell to make the Map tracking cell active.
 Click the Clear button to remove the Map tracking cell.
 Click the Display current tracking cell box to show the Map tracking cell in the 2D MapView.
 You may enter a snap distance for the Map tracking cell. If a snap distance is defined, Tags with
solutions outside the tracking cell but less than the snap distance from the tracking cell will be
shown on the boundary of the tracking cell. If tag solutions are outside of the snap distance, they
will be discarded.
2.4.11 Enabling Readers
When you assign a Reader to a group, the Reader will be enabled for that group by default. The only
reason a Reader should be disabled in a group is for troubleshooting. For example if the Reader is
failing to calibrate, or appears to be causing a bad location result, it may be helpful to disable it until
the problem is corrected.
You can quickly enable or disable a Reader across all groups by using the ―Enable All‖ and ―Disable
All‖ buttons at the top of the Reader Configuration window. You can also enable or disable a Reader
on a per-group basis by first selecting a Group number in the Sort by Group field, and then toggling
the selection under the Enable Column.
Figure 2-29: Enabling and Disabling Readers in Group 0