User Manual

36 System Installation PLUS System Manual
Proprietary Information: Do not disclose unless authorized under a Nondisclosure Agreement and the Partner Agreement.
 Click the Display current tracking cell box to show the Group tracking cell on the 2D
MapView.
 You may enter a snap distance for the group tracking cell. If a snap distance is defined, Tags that
are located outside the tracking cell but less than the snap distance from the tracking cell will be
shown on the boundary of the tracking cell. If tag solutions are outside of the snap distance, they
will be discarded.
Snap distances are intended primarily for Map tracking cells. Using a snap distance
with Group tracking cells can result in location error along boundaries between groups.
2.4.10 Map Properties
The Map Configuration window (Settings menu) allows you to select an image file floorplan for the
map, scale the floorplan, assign groups to the map, and define a tracking cell for the map.
Figure 2-28: Map Configuration Window
Under the Background Image frame:
 Browse for an image file to associate with the map. Supported image formats are bitmap, JPEG,
PNG, TIFF, and GIF.
 The Calibrate Background Image window will open. You may calibrate the size of the floorplan
by entering the dimensions of the entire image file (under the Scaling frame), or clicking the
Calibrate line button and drawing a line of known dimensions on the image file.
 Click the Clear button to remove the image file.
 Click the Calibrate button to re-enter the calibration settings for the map.