User Manual
116 Visualizer PLUS System Manual
Proprietary Information: Do not disclose unless authorized under a Nondisclosure Agreement and the Partner Agreement.
Group/Solver Parameters
o Group is in map – Select the map in which this group is located.
o Allowed solution types – Enable/disable 0D (presence detect), 1D (linear), and 2D solutions for
this group.
Enabling 0D enables Presence Detect mode, in which a Tag whose position cannot be
determined is assigned to the location of the Reader with the strongest received signal
from that Tag. The Tag’s name is listed under the Reader’s name.
o Sort type – Select TOA Sort for most instances.
o Use tracking cell – Enable/disable the tracking cell boundary.
o Allow readers in a line (ignore colinearity) – Allow solutions from colinear readers.
Member Readers
o Move readers in and out of the group.
Tracking Cell
o Clear – Resets the tracking cell to an empty state.
o Enter Polygon – Starts a new tracking cell which is entered graphically by clicking on the
tracking cell vertices in the Tracking View. To remove the last-entered vertex, press
Backspace. To cancel entry, press Escape.
o Display current tracking cell – Toggles display of the currently configured tracking cell in the
Tracking View.
o Snap distance – You may enter a snap distance for the tracking cell. If a snap distance is
defined, Tags that are located outside the tracking cell but less than the snap distance from the
tracking cell will be shown on the boundary of the tracking cell. If tag solutions are outside of
the snap distance, they will be discarded.
Map Configuration – display the Configure Maps dialog from which you can interactively configure
maps. Using this form, you can:
o Select a map to configure
o Create a new map
o Delete a map. Map 0 cannot be deleted. Groups in the map will be moved to Map 0.
o Select and calibrate a background image for the map.
o Delete the map’s tracking cell
o Graphically enter (in the 2D Map View) a new tracking cell
o Add and remove groups to and from the map