User Manual

114 Visualizer PLUS System Manual
Proprietary Information: Do not disclose unless authorized under a Nondisclosure Agreement and the Partner Agreement.
o Rename a Tag
You can use this functionality to customize a naming convention. For example, you can name all Tags
tracking infusion pumps with the same prefix to enable easy recognition of what resource a Tag
represents.
o Change the display symbol associated with a given Tag
Figure 5-17: Configure Tags Dialog
 Reader Configuration – display the Configure Readers dialog from which you can interactively
configure single or multiple Readers. Using this form, you can:
o Rename a Reader
o Enter the Reader X, Y, and Z coordinates in the units specified in the Settings / 2D MapView
Settings… (see 5.2.3 Settings)
o Set a Reader’s group membership(s)
o Change the display icon
o Enter the Reader hardware parameters of chain position and cable length. The chain position
defines where the selected Reader is in the chain – not last or last, and the cable length
designates the cable length from the SDP to the selected Reader – 0-30, 30-60, or 60-90 meters.
Chain position and cable length are automatically determined by Reader 2.0 hardware, so these fields are
only configurable for earlier Reader versions.
Figure 5-18: Configure Readers Dialog