User Manual

PLUS System Manual Visualizer 113
Proprietary Information: Do not disclose unless authorized under a Nondisclosure Agreement and the Partner Agreement.
location engine algorithm.
Figure 5-16: PLUS Location Software Library Algorithm Filter Settings
o Speed limit – Enter the speed limit of the Tags for use in the Speed Limit filter. The
default value is 1.5 meters/second which is normal walking speed.
Enter 0 to disable the Speed Limit filter.
o Moving average – Enter the depth for use in the Averaging filter
Enter 0 to disable the Averaging filter. Enter a depth between 2 and 32 for the number of positions
to average (a depth of 1 has the same effect as turning the filter off).
 Tag Configuration – display the Tag Configuration dialog from which you can interactively
configure single or multiple Tags. The Tags listed are those that have been heard by a PLUS
Reader. Using this form, you can:
o Designate which Tags are Calibration Tags (―Cal Tags‖)
o For Calibration Tags only, enter the Tag X, Y and Z coordinates in the units specified in the
Settings / 2D MapView Settings… (see 5.2.3 Settings)