User Manual

PLUS System Manual Visualizer 105
Proprietary Information: Do not disclose unless authorized under a Nondisclosure Agreement and the Partner Agreement.
 Background Image – Show/hide the background image in the 2D Map View.
 Display Trails – Display a ―breadcrumb‖ history of Tag locations
 Trail Type – Select either nodes or lines as the display type for the Tag trails
 Set Trail Length… – Set the desired length for the trail display. Maximum trail length is 1024.
Figure 5-7: Set Trail Length Dialog
Trail history and position statistics are calculated from the same data. If either is reset, the other is reset
as well.
 Reset Trails – Restart the trails and reset the Tag position statistics
 Display calibration tags – Show/hide the display of the Calibration Tags. See Figure 5-17:
Configure Tags Dialog.
 Track calibration tags – Specify, when Calibration Tags are displayed, to show the Calibration
Tags at the positions computed by the system (checked) or at the static positions in the Configure
Tags dialog (unchecked)
 Calibration assist mode – Show all Readers with a list of Calibration Tags heard by each Reader.
Also displayed are any configured Reader-Calibration Tag pairs.
Calibration Assist Mode hides the display of all standard (non-calibration) Tags.
 Show Solver Messages – Display, in the Message View Frame, the messages output by the PLUS
location engine
 Show TOA Messages – Display, in the Message View Frame, the TOA messages output by the
Readers