User's Manual

P330 Data Sheet / User Guide 49
DRAFT
This label will be located on the back or bottom side of the P330. See Figure 8-2.
Fig. 8-2: Planned location for certification number
If the P330 is incorporated into a different enclosure it is possible that the enclosure can alter the
unintentional and intentional emissions respectively.
The P330 is capable of transmitting at power levels in excess of the FCC limits for enhanced
performance. In order to use these higher powers in final applications, please consult and seek
authorization from the appropriate regulatory agencies. Time Domain has expertise in working with
regulatory agencies and can help as needed. However, the responsibility for obtaining such
authorization rests with the end user.
Additionally, the FCC regulations do not apply for US government or military applications. Proper
governmental use is described in “Government Regulations for Non-Licensed UWB Systems - Annex
K.” Developers interested in building a device for a particular government agency should discuss
their application and Annex K with that agency’s spectrum manager.
Time Domain is available to assist you with the certification process.
8.2 Compliance with the EU ETSI Standards
The standard P330 has been designed to be in compliance with the emissions mask defined in the
ETSI EN 302 065 standard.
The user is free to buy the equipment for evaluation and demonstration purposes. But before the
device can be generally marketed as an end product, its operation must be compliant with the ETSI
standard. The ETSI standard places additional requirements on operation of UWB devices beyond
just the emission mask. These requirements are related to the specific end application. For example,
depending on the user’s intended application, there can be additional limitations (or flexibilities) on
the location of fixed and mobile transmitters as well as on the rate at which transmissions can be
FCC ID
FCC Label Position