User's Manual

P330 Data Sheet / User Guide 31
DRAFT
4.10 Accessories
When the P330 is ordered as part of a Development Kit, it is provided with a number of accessories.
These accessories include: a custom plastic enclosure, a power supply, USB battery and cabling and
antenna. Units shipped outside the US are typically provided with a power plug adapter to ensure
compatibility with the user’s AC power plugs. This is illustrated in Figure 4-16.
Fig. 4-16: P330 with full set of accessories
4.10.1 Enclosure
The enclosure is intended to provide a modest level of protection for the boards. The primary goal is
to avoid damage from light handling, accidental drops on the floor, coffee spills, and the like. The
enclosures also make it easy to safely and conveniently take measurements in buildings and outdoors.
The enclosures are NOT waterproof or rain proof. A photo of the enclosure is shown in Figure 4-17.
Note that underneath the enclosure are 4 rubber feet which conceal four 4-40 (not metric) mounting
holes. Those holes are suitable for attaching the unit to a fixed object.
Fig. 4-17: P330 in standard enclosure (left) and view of enclosure bottom showing feet and
mounting holes for 4-40 screw