Getting Started Guide

Getting Started Guide
10
Fig. 6: Establishing a new connection for the radio using HyperTerminal
4. Using the screens shown in Fig. 7, select the correct COM port for your computer in the Connect
Using drop down. In the COM1 Properties screen, set Bits per second to 9600, Flow control
to "None", and click OK.
Fig. 7: Designating the connection port (left) and specifying its settings (right).
5. Power on the radio. The terminal window should scroll as boot information from the radio is sent
to the serial port. When the terminal window displays "Embedded PAT has successfully
initialized", the radio has finished booting (Fig 8).
Proprietary Information: Do not disclose unless authorized under the the PulsON Developers Program Nondisclosure Agreement