Getting Started Guide

123 124
15
Troubleshooting
Before contacting the service centre, you are advised to follow the
instructions below:
• You are advised to fully charge ( ) the battery for optimal operation.
• Avoid storing large amounts of data in your cellphone as this may affect its
performance.
• Use Factory data reset to perform cellphone formatting or software
upgrading, (to reset factory data, hold down Home key while simultaneously
pressing the Power key). ALL User cellphone data: contacts, photos, messages
and files, downloaded applications will be lost permanently. It is strongly
advised to fully backup the cellphone data and profile before formatting and
upgrading,
and then carry out the following checks:
My cellphone is frozen or will not switch on
• Check the battery contacts, remove and reinstall your battery, then turn your
cellphone on.
• Check the battery power level, charge for at least 20 minutes.
• If it still does not work, please use Home key and Power key to reset the
cellphone.
My cellphone has not responded for several minutes
• Restart your cellphone by pressing and holding the Power key.
• Remove the battery and re-insert it, then restart the cellphone.
My cellphone turns off by itself
• Check that your keypad is locked when you are not using your cellphone,
and make sure the Power key is not mis-contacted due to unlocked keypad.
• Check the battery charge level.
My cellphone will not charge properly
• Make sure you are using an ALCATEL ONE TOUCH battery and the charger
from the box.
• Make sure your battery is inserted properly and clean the battery contact if
it’s dirty. It must be inserted before plugging in the charger.
• Make sure that your battery is not completely discharged; if the battery power
is empty for a long time, it may take around 20 minutes to display the battery
charger indicator on the screen.
• Make sure charging is carried out under normal conditions (0°C to +40°C).
• When abroad, check that the voltage input is compatible.
My cellphone cannot connect to a network or “No service” is
displayed
• Try connecting in another location.
• Verify the network coverage with your operator.
• Try selecting the available network(s) manually (see “11.1.5 Mobile networks”)
• Try connecting at a later time if the network is overloaded.
My cellphone cannot connect to the Internet
• Check that the MEID number (press *#06#) is the same as the one printed
on your warranty card or box.
• Check your cellphone's Internet connecting settings.
• Make sure you are in a place with network coverage.
• Try connecting at a later time or another location.
Unable to make outgoing calls
• Make sure you have dialed a valid number and have touched .
• For international calls, check the country and area codes.
• Make sure your cellphone is connected to a network, and the network is not
overloaded or unavailable.
• Check your subscription status with your operator (credit for example).
• Make sure you have not barred outgoing calls.
• Make sure that your cellphone is not in flight mode.
Unable to receive incoming calls
• Make sure your cellphone is switched on and connected to a network (check
for overloaded or unavailable network).
• Check your subscription status with your operator (credit for example).
• Make sure that you have not barred certain calls.
• Make sure that your cellphone is not in flight mode.