Use and Care Manual

When the unit is in ECO mode, the

light will turn on. In ECO mode, the unit will

turn-off once the room is cooled to the user set

temperature. The fan will also be off at this point.

The unit will turn back on when the room

temperature rises above the user set temperature.

Before the compressor stars, the fan motor will

keep running 10 minutes-stop 20 seconds-and

again, to provide much more comfortable feeling,

and save the energy.

6. Eco Button:

Press the SLEEP button, the Sleep

Light will be on after 10s, and all the left lights will

be off. In SLEEP mode, the air-conditioner will

automatically adjust the temperature and fan

speed to make the room more comfortable during

the night. The set temperature will automatically

raise by 1 every 30-60 minutes and at most

change six times until the set temperature is 28 .

And every running time depends on the set

temperature.

7. Sleep Button:

Press the FAN SPEED button

to choose the fan speed options. You can choose

Hi, Med, Lo or auto speed in COOL mode and

choose Hi, Med, Lo in FAN mode.

8. Fan Speed Button:

When the Filter Check light is off,

it is useless to press the Filter Check button. When

the Filter Check light is on, it can turn off the light

by pressing the Filter Check button. After the

fan motor works for 500 total hours, the Filter

Check light will turn on to remind the user to clean

the filter.

Filter Button:

10.

To direct the airflow,

horizontal wheel to control the horizontal direction,

air deflector to control the vertical direction.

Directional Louvers:

horizontal wheelair deflector air deflector