TS5010
Contents Important Safety Instructions..............................................................................................1 Safety........................................................................................................................................................................................1 Warning...................................................................................................................................................................................
Important Safety Instructions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
• Caution: - - - DO NOT INGEST BATTERY,CHEMICAL BURN HAZARD Use of controls or adjustments or performance of procedures other than those described herein, may result in hazardous radiation exposure or other unsafe operation. To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. The apparatus must not be exposed to dripping or splashing and objects filled with liquids, such as vases, must not be placed on apparatus.
For U.S. models FCC Information Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.” NOTE: • This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
What’s in the Box Main Unit Wireless Subwoofer User Manual 2.5mm TV's remote control receiving extension Cable Wall Bracket/ Silicone pad Remote Control AC Power Cord 3.5mm audio Cable Optical Cable Wall mounting Screw Specifications Soundbar Power Supply AC 100-240V~ 50/60Hz Power Consumption 25 W / < 0.5 W (Standby) USB 5V Dimension (W x D x H) 800 x 65 x 86 mm Audio input sensitivity 500mV Frequency Response 120Hz - 20KHz Impedance 8Ω 500mA Bluetooth Version V 4.
Identifying the Parts Main Unit 1 5 6 1 button Switch the unit between ON and STANDBY mode. 2 (SOURCE) button Select the play function. 3 (Bluetooth) button Select the Bluetooth mode. Press and hold to activate the pairingfunction in Bluetooth mode or disconnect the existing paired Bluetooth device. 2 3 4 8 9 7 10 11 12 8 OPTICAL Socket Optical input jack. 4 VOL+/VOL- buttons Increase/decrease the volume level. 9 USB Socket Insert the USB device to play music.
Wireless Subwoofer 1 AC~ Socket Connect to power. 2 PAIR button Press activate the pairing function between the main unit and the Subwoofer. 3 PAIR Indicator Light up solidly when the pairing succeed. PAIR 1 2 3 Remote Control 1 Switch the unit between ON and STANDBY mode. 2 MUTE Mute or resume the sound. 3 Source buttons Select the play function. 4 VOL+/VOLIncrease/decrease the volume level. 5 I/I Skip to previous/next track in Bluetooth/USB mode.
Replace the Remote Control Battery 1. 2. 3. The remote control requires a CR2025, 3V Lithium battery. Push the tab on the side of the battery tray towards the tray. Now slide the battery tray out of the remote control. Remove the old battery. Place a new CR2025 battery into the battery tray with the correct polarity (+/-) as indicated. 4. Slide the battery tray back into the slot in the remote control.
735 mm 1 3 735 mm Remove the screws Install the wall mounting screws 2 4 9OROIUTK VGJ Connections IR (TV's Control Sensor) Socket When the Soundbar is placed in front of the TV, it may block the remote control reception of the TV. If you cannot use the TV remote control. You can use the 2.5mm TV's remote control receiving extension cable (included) to connect to the IR jack on the back of the main unit and the other end to the TV remote sensing area.
Use the AUX Socket A. Use a RCA to 3.5mm audio cable (not included) to connect the TV’s audio output sockets to the AUX socket on the unit. B. Use a 3.5mm to 3.5mm audio cable (included) to connect the TV’s or external audio device headphone socket to the AUX socket on the unit. ';> .KGJVNUTK Connect to Power Risk of product damage! - Before connecting the AC power cord, ensure you have completed all other connections.
NOTE: • • • • If the wireless connection fails again, check if there is conflict or strong interference (for example, interference from an electronic device) around your location. Remove these conflicts or strong interferences and repeat the above procedures. The subwoofer should be within 6m of the soundbar in an open area. If a TV or an external device is connected, the main unit and the subwoofer will switch on automatically when the TV or the external device is switched on.
AUX/OPTICAL Operation 1 Ensure that the unit is connected to the TV or audio device. 2 While in ON mode, press the (SOURCE) button on the unit repeatedly or press the AUX, OPTICAL buttons on the remote control to select the desired mode. 3 Operate your audio device directly for playback features. 4 Press the VOL +/– button to adjust the volume to your desired level.
• • If the device is moved beyond the operational range, when it is brought back, please check if the device is still connected to the player. If the connection is lost, follow the instructions above to pair your device to the player again. Listen to Music from Bluetooth Device - If the connected Bluetooth device supports Advanced Audio Distribution Profile (A2DP), you can listen to the music stored on the device through the soundbar'.
Troubleshooting To keep the warranty valid, never try to repair the system yourself. If you encounter problems when using this unit, review the following before requesting service. • No power Ensure that the AC cord is properly connected. Ensure that there is power at the AC outlet. Press (standby) button on the remote control or soundbar to turn the soundbar on. • No sound Increase the volume. Press Volume Up on the remote control or on the soundbar.
TCL SUN INC. 4nd floor ZEN Tower building, 1111 Nativiadad A. Lopez st., Ermita, Manila.1000 Tel 0063 2 567 0705 www.tcl.
