ALTO 3 2.
1 What's in the box Make sure you read all the safety information before you use this product.
2a Overview Sound Bar main unit Power button: Short press to power on/off. Long press to reset to factory default Source button: Press to switch the audio source among AUX/BT/OPT/USB modes. Volume buttons: Press to increase or decrease the volume level.
2b Overview AC IN AC IN
3 Place your Sound Bar The ideal place to position the Sound Bar is centered underneath your TV.
4a Optical There are 2 ways to connect your sound bar to the TV (listed in order that we recommend): Optical and AUX (refer to 4b). Connect the Sound Bar with your TV through the supplied Optical cable. Connect the Sound Bar to the power supply with the supplied power cord.
4b AUX Connect the Sound Bar with your TV through AUX cable (not supplied). Connect the Sound Bar to the power supply with the supplied power cord.
5a Install or replace the remote batteries Battery type: 1.5V AAA Alkaline battery x 2 1 5b 2 3 4 Using the Remote Short press: Power off Long Press: Factory default Play/pause/resume playback in Bluetooth/USB mode Next in Bluetooth/USB mode Previous in Bluetooth/USB mode Source input Press to select the equalizer (EQ) among MOVIE, MUSIC, TV. Mute/Unmute Volume+/- Press and hold to activate the pairing function in Bluetooth mode or disconnect the paired device.
6 Pair with your Bluetooth device 1 You can stream music from your mobile device via Bluetooth. 1. Press . 2. Press on the remote control. 3. Press and hold or on the remote control. > You hear a sound signal and blue light is flashing on the sound bar. > You will hear a sound and see a blue light flashing on the sound bar, indicating that it is ready to pair. 4. Power on your Bluetooth device and activate its Bluetooth function. 5. Select TCL Alto 3. > You hear a sound signal.
7 Sound Bar LED Display The LED display on the Sound Bar gives you information about the status of Sound Bar.
FAQ Does this Sound Bar work with any TV? How to clean the Sound Bar? Yes, the Sound Bar is compatible with any TV that has one of the ports below: 1. Optical audio output (TOSLink) 2. Headphone output Please keep your Sound Bar in a dry and ventilated environment. If it needs to be cleaned, please wipe it gently with a soft, dry cloth without water or other cleaning agents. When the Sound Bar and TV are both on, there is an echo effect. If using optical or AUX connection, simply mute the TV speaker.
support.tclusa.com or support.tclcanada.com TS3100_NA_QSG_V1.