Operation Manual

19
English
Audio Setting
1. Press SETUP
[General Setting] menu is displayed.
2. Press  to select [Audio Setting],
then press  .
3. Select an option, press  to access.
Home Exit
Audio Output
Spdif PCM
PCM
48K
Use cursor key to move focus,use
“Enter ” key ro select
HDMI
Down_sam
Off
DRC
p
... Audio Setting...
4. Press  to select a setup option and
press 
5. Select the setting you wish to change
and press OK to conrm.
- Press  to return to the previous
menu.
- Press SETUP to exit the menu.
[Audio Output]
• [Spdif]
Select the output mode of Digital Out
jack, options include Bitstream, PCM,
Reencode and Off.
{Bitstream} – output digital signal
without any processing.
{PCM} – output digital signal with
processing, only two channels export.
{Reencode} – Auto select signal type
from Digital Out jack according to the
Audio streamon disc.
{Off} – Disconnet bit stream export.
• [HDMI]
Select the output mode of HDMI Digital
Out jack, options include Bitstream,
PCM, Reencode and Off.
{Bitstream} – output HDMI digital
signal without any processing.
{PCM} – output HDMI digital signal
with processing, only two channels
export.
{Reencode} – Auto select signal type
from Digital Out jack according to the
Audio streamon disc.
{Off} – Disconnet bit stream export.
• [Down_samp]
Select the digital audio signal sampling
frequency.
{48K} – For discs recorded at sampling
rate of 48 KHz.
{96K} – For discs recorded at sampling
rate of 96 KHz.
{Off} – Close the digital audio signal
the sampling frequency.
• [DRC]
Select the Dynamic Range Control mode
which makes it available to listen to a
movie at a low volume without losing
sound clarity.
{On} – Dynamic range compress.
{Off} – Non-dynamic range compress.
{Auto} – Adjust the DRC according to
input audio.
System Information
1. Press SETUP
[General Setting] menu is displayed.
2. Press  to select [System
Information],
- The current software version and MAC
address display
- Press  to return to the previous
menu.
- Press SETUP to exit the menu.
SETUP
Exit
Use cursor key to move focus,use
“Enter ” key ro select
Software version: BDP V2.0
MAC: 00-1C-50-00-00-00
... System Information ...