Operation Manual

18
English
Display Setting
1. Press SETUP
[General Setting] menu is displayed.
2. Press  to select [Display Setting],
then press  .
3. Select an option, press  to access.
TV
TV Screen 16:9 Full
Auto
PAL
RGB
Off
Use cursor key to move focus,use
“Enter ” key ro select
Video Process
Resolution
TV System
Color Space
HDMI Deep color
... Display Setting...
4. Press  to select a setup option and
press 
5. Select the setting you wish to change
and press OK to conrm.
- Press  to return to the previous
menu.
- Press SETUP to exit the menu.
[TV]
• [TV Screen]
Select the screen format according to
how you want the picture to appear on
the TV.
{16:9 Full} – for a disc with the aspect
ration of 4:3, the output video is
stretched into 16:9 full screen.
{16:9 Normal} – for a disc with the
aspect ration of 4:3, the output video is
resized vertically to match what will be
seen on the display.
{4:3 Pan&Scan} – for standard TV,
Display a wide picture on the entire
screen and cuts off the redundant
portions.
{4:3 Letterbox} – for standard TV,
Display a wide picture with two black
borders on the top and bottom of 4:3
screen.
• [Resolution]
Select a video output resolution that is
compatible with your TV display
capability.
{Auto} – Select the most suitable
resolution according to the input video.
{480I/576I},{480P/
576P},{720P},{1080I},{1080P} –
Select a video resolution setting that is
best supported by the TV, See TV
manual for details.
• [TV System]
If the video does not appear correctly,
change the setting.By default, this
setting matches the most common
setting for TVs in your country
{NTSC} – for NTSC-system TV.
{PAL} – for PAL-system TV.
{Multi} – for Multi-system
TV,compatible with both PAL and NTSC.
• [Color Space]
Select a predenned color space of
picture
{RGB} – select RGB color space.
{YCbCr} – select YCbCr color space.
{Full RGB} – select Full RGB color
space.
• [HDMI Deep Color]
This feature is available only when the
display device is connected by a HDMI
cable, and when it supports deep color
feature.
{Off} – Output standard 8 bit color.
{30 bits} – Output 30 bits color.
{36 bits} – Output 36 bits color.
• [HDMI 1080P 24Hz]
{On} – Enable to select this video
resolution setting.
{Off} – Disable to select this video
resolution setting.
[Video Process]
• [Video Adjust]
Select a predened set of the video.
1. Press OK .
2. Press to adjust the video
Brightness, Contrast, Hue and Saturaon.
3. Move to [Exit] to exit.
Brightness
Contrast
Hue
Satutation
Return ExitChange