Blu-ray Disc Player THBD3012
Contents English 1 Important.................................................................................................................... 3-4 Safety and important notice............................................................................................ 3-4 2 Your Product............................................................................................................... 5-7 Regions codes...............................................................................................
Safety and important notice WARNING: • TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. • DANGEROUS HIGH VOLTAGES ARE PRESENT INSIDE THE ENCLOSURE, DO NOT OPEN THE CABINET. REFER SERVICING TO QUALIFIED PERSONNELONLY. • DO NOT INSTALL NEAR ANY HEAT SOURCES SUCH AS RADIATORS, HEAT REGISTERS.
Notice for Copyright English The unauthorized recording, use, display, distribution, or revision of television programs, videotapes, BD DVDs,DVDs, CDs and other materials, is prohibited under the Copyright Laws of the United States and other countries,and may subject you to civil and/or criminal liability. This product incorporates copyright protection technology that is protected by method claims of certain U.S.
Region Regions Codes Both the Blu-ray Disc player and the discs are coded by region. These regional codes must match in order to play the disc. If the codes do not match, the disc will not play. The Region Number for this Blu-ray Disc player is described on the rear panel of the Blu-ray Disc player. Region U.S.A.
Product overview English Main Unit 1 NO 3 5 Control Function a 2/STANDBY button Turns the power on or restores the unit to the standby mode. b Z Open or close the disc compartment c Disc compartment Loads a disc into the disc drive. d IR Sensor Point the remote control at the IR sensor. e Display panel Show information about the current status of this unit f u Playback/Pause g x Stop play. h > Search forward. i .
| ON / STANDBY • To switch the DVD player to ON or standby mode SETUP • Enters or exits the system setup menu MC • To OPEN/CLOSE Media Center ANGLE • Switch the camera angle during playback DIGEST • To access digest playback mode MUTE • Mutes the sound output from player REPEAT • Selects various repeat mode ZOOM • To zoom out/in / F.R & F.
3 Connect English Make the following connection to use this product. Y Pb Pr AUDIO IN Connecting to a TV Connect the product to TV to view disc play, Select the best video connection that TV can suport: Option 1: Connect to the composite video jacks Option 2: Connect to the component video jacks Option 3: Connect to the HDMI Jack. Option 1: Connect to the composite video jacks You can connect this unit to a TV through the composite video cable which provides standard picture quality. 1.
Option 1: Connect to digital amplifier/ receiver Option 2: Connect to analogue stereo system Option 3: Connect network. Option 1: Connect to the digital amplifer/receiver Rount the sound from this player to other device to enhance audio play 1. Connect the network cable from the LAN jack on the player to the LAN jack to the system. Connect USB device A USB device provides an additional memory to enjoy software updates and BD-Live bonus content. DIGITAL AUDIO INPUT COAXIAL OPTICAL 1.
4 Preparation English Always follow the instructions in this chapter in sequence. Note: - Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation. Prepare the remote control 1.Open the battery compartment. 2.Insert 2 AAA batteries with correct polarity (+/-) as indicated. 3 Close the battery compartment. Notes: - Keep the batteries away from the heat,sunshine or fire. Never discard batteries in fire.
5 Playback 1. Press STOP button once to go to Prestop mode, the TV screen will show the Pre-stop logo. Playback Functions Basic Playback 1. Press STANDBY/ON switch on the front panel or the remote control, your player will turn on. The unit will take around 30 seconds to warm up. 2. Turn on the TV, and then select the input setting on the TV that matches the connection method you used to connect your player. 3. Press OPEN/CLOSE disc tray. to slide out the 4.
Advanced Playback English DISPLAY Press this button and the screen will display some information about disc, such as: Title number, Chapter number, and Time Elapsed. Press this button twice to turn off the information display. REPEAT Press once or more times to select different repeat modes as the following looped sequences: Repeat Off, Repeat Chapter, and Repeat Title. REPEAT A-B To play certain section within the video or song, press REPEAT A-B button to set the start-point.
For the playback method, refer to the instructions for the disc. AUDIO Press AUDIO button on the remote control to select the audio streams that set within the Blu-ray or DVD disc. The screen will display: AUDIO: X / XX XXX XXXX “X” - the Current Audio Stream Number “XX” - The total number of Audio Stream “XXX” - Audio Language Name “XXXX” - Audio Technology 1. Turn on secondary video by pressing the PIP button, and press the PIP button again to display a PIP ON sign. 2.
6 Contomizing English This section describes the various setting option of this player. If the setup option is grayed out, it means the setting cannot be changed at the current state. General Setting 1. The DVD Player and TV will be opened, after they are connecting the power. - [General Setting] menu is displayed. 2. Press to select an option, then press to access. ... General Setting ...
French an OSD language before starting. The language selected will be applied not only here but also in other OSD windows, menus etc. Previous ENTER Next 6�������� . Press OK, enter Resolution setting. English Choose 480I/576I a resolution that fit your TV. Change will be applied immediately, you have 15s to determine whether to save the setting or rollback to prior resolution.
[Playback] English ... General Setting ... System Angle Mark On Language PIP Mark On Playback Secondary Audio... On Security Last Memory On Network PBC On Use cursor key to move focus,use “Enter ” key ro select Home Exit • [Angle Mark] Some DVDs contain the scenes recorded with multiple angles, which allow you to enjoy the videos with your desired angles, therefore the angle mark is displayed only when the DVD disc is supportable for multi-angle and Angle Mark is set to ON.
Language Playback Security Networ k Screen Save Off Parental Control Disc Auto Playback On Select level: Off CEC PG Load Default On More...
English Display Setting 1. Press SETUP [General Setting] menu is displayed. 2. Press to select [Display Setting], then press . 3. Select an option, press to access. ... Display Setting... TV TV Screen 16:9 Full Video Process Resolution Auto TV System PAL Color Space RGB HDMI Deep color Off Use cursor key to move focus,use “Enter ” key ro select 4. Press to select a setup option and press 5. Select the setting you wish to change and press OK to confirm.
1. Press SETUP [General Setting] menu is displayed. 2. Press to select [Audio Setting], then press . 3. Select an option, press to access. ... Audio Setting... Audio Output Spdif PCM HDMI PCM Down_samp 48K DRC Off Use cursor key to move focus,use “Enter ” key ro select Home Exit 4. Press to select a setup option and press 5. Select the setting you wish to change and press OK to confirm. - Press to return to the previous menu. - Press SETUP to exit the menu.
7 Specification English Playback media BD-Video, DVD-Video, DVD+R/+RW, DVD-R/-RW, DVD+R/-R, CD-R/CD-RW, Audio CD, Video CD/SVCD, Picture CD, MP3-CD. Video Signal system:PAL/NTSC Composite video output: 1Vp-p (75 ohm). Component video output: 480/576i, 480/576p, 720p,1080i HDMI Output: 480i/576i,480p/ 576p,720p,1080i,1080p. Audio • 2 Channel analog output - Audio Front L&R : 2 Vrms (> 1 kohm) • Digital output: 0.
English 8 Troubleshooting If you experience any of the following difficulties while using this unit, check the list below before consulting your nearest TCL dealer. Problem Tip No reaction to the remote control. Connect the product to the power outlet. Point the remote control at the product. Insert the batteries correctly. Insert new batteries in the remote control. No video signal on the display device. Turn on the TV. No audio / video signal on the display device via HDMI cable.
Cannot play back a disc. Make sure that the product supports the disc. English Make sure that the Blu-ray Disc player supports the region code of the DVD or BD. For DVD+RW/+R or DVD-RW/-R, make sure that the disc is finalized. POWER Clean the disc. Cannot play back JPEG files from a disc. Make sure that the disc was recorded in the UDF, ISO9660 or JOLIET format. Cannot play MP3 files from a disc. Make sure that the disc was recorded in the UDF, ISO9660 or JOLIET format.
Aspect ratio Aspect ratio refers to the length to height ratio of TV screens. The ratio of a standard TV is 4:3, while the ratio of a highdefinition or wide TV is 16:9. The letter box allows you to enjoy a picture with a wider perspective on a standard 4:3 screen. Blu-ray Disc (BD) Blu-ray Disc is a next generation optical video disc capable of storing five times more data than a conventional DVD.
English LAN (Local Area Network) A group of linked devices in a company, school or home. Indicates the boundaries of a particular network. Local storage This storage area is used as destination for storing additional contents from BD-Live enabled BD-Video. MP3 A file format with a sound data compression system. MP3 is the abbreviation of Motion Picture Experts Group 1 (or MPEG-1) Audio Layer 3. With the MP3 format, one CD-R or CD-RW can contain about 10 times more data than a regular CD.